4g63 Swap
adamgtx
01-08-2005, 02:04 AM
will be putting in a 4g63 from japan in 94 eclipse thats 4g63 is blown both are na (just need it to get around) what r the differences if any? and how hard would be the swap?
GotGrip666
01-08-2005, 03:12 AM
the ecu is different
bighauns
01-09-2005, 12:39 AM
i am swaping a 4g63t right now. the big difference is if there are awd and fwd differences. if so, then you will have flywheel issues. as well, the ecu should be fine. i know a few guys who have done the same swap and they used their old ecu. as of now, that is all i really know of.
blue94eagletalon
02-07-2005, 03:48 PM
my friend put a jdm 4g63 in his car which has a 4g63 and it bolted up and worked just fine without any trouble with the ecu
bighauns
02-07-2005, 05:44 PM
The ECU is only a big deal when you use the JDM intake manifold I think. As well you will want it if the engine comes with larger injectors. That is my understanding though, I am not totally 100% sure if that is accurate, but reasonably so.
GotGrip666
02-07-2005, 06:01 PM
my friend put a jdm 4g63 in his car which has a 4g63 and it bolted up and worked just fine without any trouble with the ecu
are you trying to say your friend put in a jdm 4g63 with the usdm ecu with no problem?
are you trying to say your friend put in a jdm 4g63 with the usdm ecu with no problem?
Str8in
02-07-2005, 09:33 PM
the big difference is if there are awd and fwd differences. if so, then you will have flywheel issues.
Thats not an issue all you have to do is use a FWD flywheel if it comes with a awd flywheel and vise versa
Thats not an issue all you have to do is use a FWD flywheel if it comes with a awd flywheel and vise versa
blue94eagletalon
02-10-2005, 01:49 PM
yes the jdm 4g63 started on the first crank. all we did was put the motor in and plug it in
bighauns
02-14-2005, 08:29 PM
Was it the Cyclone intake Manifold? What about the injectors? It all depends on a few different variables. there is a chance that it could start up right away, but then your fuel mileage could be affected.
Fast Forward
02-16-2005, 12:34 AM
Just in case you need a source.
www.jdm-motor-engines.com
www.jdm-motor-engines.com
blue94eagletalon
03-02-2005, 11:09 AM
no it wasn't a cyclone
matth
03-03-2005, 10:27 PM
I just finished a swap from a 1.8 to a jdm 6 bolt 4g63 used everthing that came with the engine. Bought a usdm ecm and usdm wiring harnes and had no problem at all so you should have no problems going from a usdm to a jdm .
matth
03-03-2005, 10:34 PM
I know of a pretty cheap place to get a jdm 4g63 try soko.com. I got mine thier for $490. shipped
Jroc97
03-04-2005, 08:57 PM
Thnx alot for tht site bro, I think ima work with them.
Automotive Network, Inc., Copyright ©2026
