Our Community is over 1 Million Strong. Join Us.

Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Grain-Free, Zero Fillers


bright lights


justlearning
01-04-2005, 09:03 PM
okay my bright lights dont work and havent since i bought the car i presume to activate the brights u pull back on the turn signal lever...well it will pull back but wont spring back forward, and im assuming this is where the problem lies. well heres the question since i have cruse control and all that the switch costs like a hundred and some dollars, i have a 30 amp relay that says its for horns or lights will this work if i splice the wires to the bright lights run them to that relay and then to a switch, i know its ghetto but much cheaper... if this will work what wires do i cut and will this still allow my other lights to work and all the stuff assosiated w/ the original switch (turn signals, wipers, cruise control...etc...) oh yeah and i have a 91 rs 305 tbi

chevy_chic20041
01-05-2005, 01:48 AM
okay my bright lights dont work and havent since i bought the car i presume to activate the brights u pull back on the turn signal lever...well it will pull back but wont spring back forward, and im assuming this is where the problem lies. well heres the question since i have cruse control and all that the switch costs like a hundred and some dollars, i have a 30 amp relay that says its for horns or lights will this work if i splice the wires to the bright lights run them to that relay and then to a switch, i know its ghetto but much cheaper... if this will work what wires do i cut and will this still allow my other lights to work and all the stuff assosiated w/ the original switch (turn signals, wipers, cruise control...etc...) oh yeah and i have a 91 rs 305 tbi
i suggest doing it the right way cause when u start messing with stuff like that u can get some screwy stuff happening.... :nono:

DaMoNe6969
01-05-2005, 02:04 AM
i think you should get the proper switch from a wrecker if its too much from dealership.. (I still wouldnt think itd cost that much??)

I could try to explain how to wire in a SPDT relay to your lows and highs, but as Chevy Chic said, you could start havin electrical problems, and light failures.. yeah, turns out you Really do need those!

89IROC&RS
01-05-2005, 02:42 PM
just buy the new switch, ghetto rigged stuff always causes more problems in the long run.

Add your comment to this topic!


Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food