Car won't start. Code 10

The other night I was accelerating on the highway and the engine just quit. I got it towed home and looked at the coputer and it showed a code 10. I looked it up and it was an intake air temperature problem. What can be the problem?

Was it really cold in your area last night, and what engine are you running?

Was it really cold in your area last night, and what engine are you running?

The car is a 91 Civic Dx with a D15B2 engine. The temp was only 70 degrees

Does it start???

make sure that all of your conections to your intake manifold are pluged in all of the way

The car will start sometimes but the exhaust will backfire and theres not much power. I have to depress the accelrator fully to keep the car at idle speed

The car will start sometimes but the exhaust will backfire and theres not much power. I have to depress the accelrator fully to keep the car at idle speed


fuel pump ???????????

ur problem doesn't seem related to the IAT....sounds like a timing problem. Check the timing on your cam gear...you may have jumped a few teeth. Also, open the cap on the dizzy to see if the rotor is still attatched...