99 Camaro Transmission

I am changing the clutch out in my 1999 Camaro and I am having trouble getting the transmission away from the engine. I have removed the six bolts holding the bell housing to the engine and have removed the drive train. So my question is are there support pins or guiding pins that I can't see that would be holding the transmission in place?

there should be two pins, one on either side the trans will have to be pulled strait back about an inch before it can be lowered.

Been awhile since I pulled a manual trans, but, doesn't the clutch have to be unbolted from the flywheel? Sorry if I'm wrong.

ya know, im an idiot, yup your absoultly right, completely forgot about that. for some reason i thought that the clutch stayed on the flywheel, and the trans input shaft slid out but i think you are right and the clutch has to be unbolted alla the torque converter, should be three bolts accessed from the engine side of the flywheel.

Nah, no idiots here, just trying to help him out.
;-)

lol, lifes to short not to poke fun at yourself ;) believe me, if ya knew me in real life, youd agree with me :)