paint problemos

alright im painting my lexus is300 or altezza whatever u wanna choose to call it, but i put on my primer and theres little tiny holes in the primer, just wanted to know what to do to get ride of them and in the future how to get ride of them, thanks for the help and im getting a digi camera soon so get some pics up soon, and give me some ideas for a color if u feel the need i was leaning to a metalic blue but suggestions are helpful thanks

you need to sand the area then wash the body and let air dry then re prime it ,always make sure yo have clean hands and the kit is clean! are you using rattle canprimer? if so put the can of primer in hot water for a few mintues,it will help if flow easy!

also make sure you don't use primer in very cold conditions and very humid conditions.

Did you warm the can first?
These holes can appear when you spray the paint on too thick, trapping the air underneath the paint

What kind of primer do you use ?

is it look like bubble hole ? if so, you make your coat too tick. sandpaper will get rid of that (600grit and higher)

Yeah, definitely make sure you clean the body before priming it, and let it airdry. Try not to touch the outside too much. Many of us learned this the hard way!

Good Luck!

light application, mist coats and everything guys allready told you.