Our Community is 940,000 Strong. Join Us.


Need a quick and cheap way to fix cutoff!!!


Wulfen_Fenris
12-30-2004, 07:33 PM
I got a 91 integra Ls

My problem is that my cutoff is now at approx. 3200 RPM. I recently change my rotor and cap. Sometime it's ok but most of the time it jam at 3200 RPM. There a little squik noise that seem to come from my distribution module. But I think it may be a sensor because when the engine light is on, the problem occur and when I start it and the engine light is off, every thing goes normaly.

Can someone help me with that Please!!!

Greenblurr93
12-30-2004, 08:00 PM
bring your car to autozone and have them pull the code off of you ECU and tell us what code it is, that way we can better help you.

bigmack0507
12-31-2004, 01:59 AM
autozone only checks 96 or earlier models. the cpu connector is different

knorwj
12-31-2004, 07:37 AM
autozone only checks 96 or earlier models. the cpu connector is different


somehow this doesn't sound correct... if anything they would only check 96 and newer because it would be 1 standard OBDII plug from 96 on.

whtteg
12-31-2004, 09:00 AM
Autozone will check it. It is extremely hard to help you without the code.

bigmack0507
12-31-2004, 07:23 PM
i mean 96 or later. thats what they told me with my 88 lude and my 91 teg. meaning 96,97,98 so on.

bigmack0507
12-31-2004, 07:26 PM
and the autozone checker thing only works when the check engine light is on. if its not on it doesnt help. but 89 tegs and earlier u can check it easier by looking und the passenger seat and count the lights long means ten and short mean one. same idea on the 90-93 comput under the floor mat theres a red light u can check just as easily. same thing they do at the dealership.

integrawhat
01-03-2005, 09:36 PM
when i was doing my swap this happened to me i pull the ecu back up fuse for 10 or 15 sec and the problem went away. might work 4 u

Add your comment to this topic!