Performance Cams...
90Civic4G
12-29-2004, 11:15 AM
So far, all I've been able to find are cams for a 1.6L. Does anyone know where I can get cams for the 1.5L with an MPFI conversion?
fast2camciv
12-29-2004, 11:32 AM
just get a cam for a 1.6 and put it in. you can put an si cam in your 1.5 and it will be like an aftermarket cam.
90Civic4G
12-29-2004, 11:34 AM
Well I thought about doing that, but was told something from Crane Cams or Comp Cams would be more powerful...
fast2camciv
12-29-2004, 11:44 AM
yea definetly will make more power, just if you are looking for something on the cheap then si. i just read your other post and you said money isnt an issue then go with a web, or crane. i like web and they are cheap as well.
90Civic4G
12-29-2004, 12:00 PM
All Crane had was for 1.6L...will that work on my 1.5 with the MPFI conversion?
And I'll check out Web.
And I'll check out Web.
CBURKE
12-29-2004, 12:52 PM
i think the heads are pretty much the sameit's the mpfi that is dif you should be able to use them fine. where have you seen them? (cams)
90Civic4G
12-29-2004, 01:00 PM
Well I haven't found any specifically for a 1.5L yet, but you can get them for the 1.6L at http://www.cranecams.com, or http://www.compcams.com
Cjz89civic
12-29-2004, 02:13 PM
A 1.5 head is the same as a 1.6 head as far as the cam goes.
CBURKE
12-29-2004, 04:04 PM
cool thanks, does anyone make Valve Springs? i don't see them. and how much are the cams? it don't say. when they say HONDA D16 VALVE SPRING is that for the d16si? i know this is your thread sorry for all the ?
90Civic4G
12-29-2004, 04:07 PM
The cams usually cost about $300-$340....
As for valve springs---not much.
As for valve springs---not much.
jeef
12-29-2004, 08:28 PM
make sure you get springs for a non vtec... they are quiet different... and as for cams, any d series non vtec cam will plop in there... delta cams are mad cheap and good, like 100 bucks plus shipping, but they are regrinds, some ppls don't like that... I had a crane cam stage 2 in my a6, and it hauled, but they are 300+
www.exospeed.com also offers some good deals, i've dealt with the guy and he's pretty awsome... he'll answer any questions you have and he often frequents www.d-series.org
www.exospeed.com also offers some good deals, i've dealt with the guy and he's pretty awsome... he'll answer any questions you have and he often frequents www.d-series.org
vladlos
12-29-2004, 11:29 PM
people say that you need a camgear off a d16a6 to use with a d16a6 cam in a d15. true?
4G4D Store
12-29-2004, 11:46 PM
or an adjustable cam gear.
90Civic4G
12-30-2004, 11:24 AM
Yeah, you need an adjustable camgear for the camshaft to fit.
CRX-Crooks
12-30-2004, 03:11 PM
Get gude cam gears and cam beacuse there gude.lol
Automotive Network, Inc., Copyright ©2026
