Z32 Mafs

if i were to get this mafs http://img.villagephotos.com/p/2004-12/908331/z32mafs.jpg what else would i need to put it on my ka? do i need custom piping for my intake? will the harnesses that go to the ecu connect?

ok first off you'll need to get a maf adapter to get it to fit on the piping

i would get a filter, cone/mushroom

and you need to get a wire adapter, unless you want to splice the wiring yourself

you should be able to find a kit online to make it easier

you mean i could get all that stuff in a kit?? where would i find a kit? i'm gonna look for one now but if you know of a place to get them let me know.. thanks

i think i know what kit your looking for http://www.jspec.com/tomeiz32kit.html
i dont know if the price is right, but thats a z32 kit for you.

ok so it turns out that nobody knew if the z31 mafs fits on the 240 with the adapter kit posted above. obviously the z32 mafs fits cause thats what the kit is for. i emailed jspec.com about it and am waiting for an answer. apparently it all fits the same but i have to wait and find out from the people who MAKE the kit just to know for sure. in the meantime if anybody knows the answer to this dilemna please post it.

seems like nobody cares about this.. turns out the z31 DOES NOT fit with the tomei z32 conversion kit from jspec. i called about 5 places including jspec and they said most likely not.. anyways, i did some crazy looking around on ebay and found a z32 mafs thats up in 6 days so im gonna be the one to get it..

If you're getting the Z32 MAFS then why is the Z31 in your sig?

very true.. i thought it was gonna be the z31 but i found a z32 so i'll change it