big 16 g

wut injectors will go best with a big 16g. i have that and a greddy fmic with alot more ugrades



Edited by: EclipseRST

Do you know how to use grammar and spell check??? If not, nows the time to learn cause I will not put up with posts like this! Do it again and it will be deleted. This is how your post should look:


What injectors would go best with a big 16g? I have that and a greddy fmic, with a lot more upgrades.



Also put your car and you mods in your sig so we know what you have instead of trying to guess!!

There is a LOT of info on this topic on this site already, its a pretty common question. But if you post what type of tuning device you will be using such as MAFT, AFC, DSMlink, keydiver chip, etc, I'll be happy to make a quick recomendation. It's going to be a toss up between 550s and 650s though.

Get 560cc evo injectors, they can be had for $150 or less from Evo8 owners who are upgrading.

good call on the EVO injectors, i almost got some but ended up with the 660's...

Get 560cc evo injectors, they can be had for $150 or less from Evo8 owners who are upgrading.

Really, I had no idea they would work. Are they low impedence like the stockers? Do I need to get the seal kit (I don't know exactly what the kit is, but I see it is recommended with an upgrade). And all this time, I thought I had to pay $300 for a set of 550's Great info Joe!!!!

I had a 16G on my 1998 gst and the stock 450's where fin. Now i did only have that turbo for a week before i blew it up. (got metal in the motor)

stock wont be good enough to spool up the 16g

stock wont be good enough to spool up the 16g


Yes they will, just not anything over ~15 psi.

Injectors don't "spool up" a turbo. Please re-adjust your terminology so that statement makes some sense.