need help with hookin in a resistor box

im hookin in a piggy back system and dont know which wires to hook up for the resistor box. cant find a wiring diagram on which wires to hook up. the resistor box has i believe 5 or so wires. if any one can help which wires would i hook it in to. i know its for the injectors. dont know what wires to hook up.

do you mean you need an rpm signal?if so i can help you with a pic.

do you have a link to where you bought the box from? or a similiar device?

its not an rpm signal. it has to do with the lower impedence with 450cc injectors. the guy that sold it to me dont have instructions for a 420a eclipse.

personally i think you just wasted whatever money you paid for the worthless resistor.

im turboing my eclipse and i need a resistor box to lower the impedence. its not a waste of money, if i was to buy an safc for 250 that would be a waste of money for the resistor box i only paid about 30 bux i think it was a great savings.

Its not a resistor box... What you have to do is put 2 resistors in parallel on each injector harness in order to run high imedance injectors, like the stock 450cc turbo injectors in a N/T.

the pack has 5 wires. 4 red and the other i believe is yellow or orange. do i hook the 4 wires on the negative side of the injectors and the other wire goes in on the ground??

I dont know where you got that box from but I have never heard of it! The only thing that I have ever seen is the resister mod. Go to 2gnt and ask them there!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7943996322&category=33553

this is the item i was talking about

Did you not read the title or description at all. Last time I checked a Eclipse was not made by Honda or Acura.

Its also for OBD0 which your car is OBD2.. Sorry to say, you are out $30! So your "great savings" turned into a usless pile of shit!

i thoght it was the resistor mod, but i was still right you wasted your money