EVO316g Question

I have these mod on my car Apexi N1 exh Greddy type-s bov Injen intake and greddy turbo timer I want to know when I get my evo316g installed with the 2g kit would my injen intake fit and would my boost be 10 to 12psi cause I have no boost gauge or a boost controller yet?
:confused:

does your turbo have an internal w/g?
why would your intake affect your boost level?

The intake should fit. Boost would be somewhere around 9psi without a boost controller.

So your telling me the factory setting for a 2g eclipse turbo is 9psi? people tell me 10psi to 12psi?

:confused:

There is no setting. The internal wastegate on the turbo you buy will set your boost. It's somewhere like 9-12psi, who cares exactly because you'll have a boost controller.

he says he doesnt have a booast guage or boost controller. Definately get a boost guage first then put on the 16g

I would use the stock boost controller with it, usually ends up around 13-14 psi. But I Wouldnt even run a 14b without an aftermarket guage. If the T25 runs away from you it is unlikely to do any major damage. Not true with a larger turbo. ;)

ya just use the stock BCS. should be ok, but seriously get a gauge, even a really cheap one will work for now to be sure you don't blow up from creep or anything.