d16a6 high compression pistons in a zc

i have read some information on the internet and i found that the stroke and bore for the zc and d16a6 are the same so could i use those pistons in a zc

http://www.knology.net/~jediklc/specs.htm

there is the website i got the info from

If you use the stock D16a6 pistons in a DOHC ZC you will end up with a VERY low compression ratio, about 7 or 7.5-1. You would have to run alot of boost to make up for the low compression and thats not a good thing on stock rods and pistons. :nono:

Your thinking the wrong way. People use ZC domes pistons in d16a6's to raise compression not the other way around.

So what pistons can he put into the zc to make it high compression - that's what he's asking. He just bought a zc block.