Map sensor i think HELP!

Ok i just got my car out of the garage for overheating and poped water bolte and brakes
but now when your start it it runs for just a few secs about 15 to 20 if you touch the accell pedal it dies. I think it might be a bad map sensor

is their anywhay to know for sure ? or to bypass the sensor
the car is stuck about 20 m away from my garage and i neeed it in there tonight. is there anyway to get it running fast ? :uhoh: :uhoh: :uhoh: :uhoh: :disappoin :disappoin

The bad MAP sensor gave me an engine warning 13..check the error code using the ignition on/off/on trick from the hayes manual.

could be a faulty egr valve opening to soon, try unplugging it and plug the vacume line to test it.

cool ok now were is the erg valve and and i dont have the manual whats the trick ?

hope i get a reply before tonight cauz i could really use the jeep tonight thyanks alot guys

please give the year, model information

yea i forgto it's a 89 limited 4.0l

i'm with my sisters car now but she'll take it from me soon lol so i really need mine running to get it to move i have tu start quickly accelerate in drive then it'll die and do it all over again lol what a pain

if you are looking at the engine from the drivers side fender, it is center with the throttle body, and down bolted to the intake manifold. Its round steel valve about 2.5" and just before it is the egr valve transducer, a round black plastic thing with vacume lines to the egr valve. Unplug the vacume line from the round black plastic valve and plug the line with a bolt or something so you won't have a vacum leak. Please let us know if it works,

also, you may want to download the 88 factory shop manual from this site, some things are different for the 89 but not much, i use it for my 89 ltd. (the one with all the ugly gold crap all over it) the file is long, about 16meg.

http://www.lunghd.com/Downloads_and_Links/Downloads.htm

downloading it right now but i took a snap shot of under the hood of something i think is what your talking about is it it if so do i block hole A or hole B ?
i uploaded the pic on my forum

http://www.sakgenla.com/forum/uploads/post-20-1103404596.jpg

I got the manual can you tell em were to find a pic that might help me fid the erg valve ?

i tryed blockin the top valve of the thign in the poic it kept running as long as my feet was on the accel and could'nt iddle it just deid think i'm gettign somewere ...

not there, i can send you a pic but i need an email, i don't think i can post one here,

okay, i have to pic, where should i send it, i can't post attachments here?

email me, [email protected] i will send you the photo..

sent you the email

did'nt work and i dont have the plastic part i only have the silver part i tried loking the tube that goes in it but it didnt work

fixed the prob they replaced my tps sensor.

Try this link:
http://www.lunghd.com/Tech_Articles/Engine/Basic_Sensors_Diagnostics.htm
Good luck