Need help with part

Anyway I need help with finding the inside roof for my 91 Talon, preferreably from a certified place and how much i'm I looking forward to. I try to look for it at the junk yard but most of them are pretty much busted. I also need to know what's the average price I need to paid for a new throttle body, and what brand do you guys suggested. even know my car is a 91 talon, the engine is a 2.0 turbo from an eclipse.

So if anyone have any info please let me know.

Before anyone said anything. I did try the FAQ site, and the 1000 DSM site, but they had nothing related to my problems. The list of vendors offer part from the DSM site is just too great for me to search through each one of them one by one. So I try the forum for a better response.

the inside roof part is called a headliner. i dont know how much it will cost to buy but you can try calling the mitsu dealer or check with a auto upholstery shop since they can probably reapair yours. the dealer can also selkl you a new throttle body. i know they are very expensive, why do you need one? if you want a used one i can sell you one

ya, i need a new headliner too. it started fallin down infront of my eyes so i just stapled it up to the roof haha

yea they all fall down you should see my 92. it has a sunroof so when you drive with the sunroof out the headliner flaps around in the back at the top of the window

seen some carbon fiber hedliners on ebay

the inside roof part is called a headliner. i dont know how much it will cost to buy but you can try calling the mitsu dealer or check with a auto upholstery shop since they can probably reapair yours. the dealer can also selkl you a new throttle body. i know they are very expensive, why do you need one? if you want a used one i can sell you one

I found a place that would give me $20 for the headliner. I can put it in myselft put the weather start to get cold. So I might just paid the guy 20 to install it.

I need the throttle body because my car idle very hight right now. I try to replace the idle speed adjustment screw and it still the same. Upon close inspection I see that where my throttle body and the intake manifold meet there's a small gap of about 2/10th of an inch. So my throttel body is sitting a little bit below. I believe that where those two part join together, there shouldn't be any gap. They should be evenly level. I found one in the junk yard for about $75.

I need to know how much a brand new (regular) throttle body cost, and how much would a performance throttle body cost. If it's not too much, I might as well swing for a brand new performance piece.