Nos kits for 2003 s-10 help

i was want to put a kit on a 2003 s-10 i was want in like the zex kits but i dont think anyone make it i was want a kit that was a like the zex that would not fire if every thing was not right then we get to the top speed fuel cut of you can chip it to remove this but these kits advace you timeing and with nos you need to retade it right tell me if i am wrong so now i have two problem this is my last mod i was wanting to do so i need some help dont want to blow her to hell and back you know

well the top speed can be reset with a hyperteck power programer, i dont like chips, like you said they adjust your timing, and with nos your right you dont want that, you could blow it to hell and back with an early combustion, so ide look into reprogramming the top speed and go from there

well the top speed can be reset with a hyperteck power programer, i dont like chips, like you said they adjust your timing, and with nos your right you dont want that, you could blow it to hell and back with an early combustion, so ide look into reprogramming the top speed and go from there


is there a kit that you have used or know someone has used

I know that NOS makes a kit for just about everything, we bolted on 50hp to my 626.

Also you might want to invest in a rev limiter that and a better radiator, Be-Cool makes really good ones thats whats on my mazda.

well your right, just about every thing, most imports for sure, on our trucks though i have yet to find a spicific kit, you have to buy the "universal" kit and it sounds like you know how to hook this stuff up, and if you dont there will be general directions, the only kits ive seen used so far are kits for honda civics, but chevy s 10's aint so lucky, you have to cut and piece it together, take your time it will work fine, me and my cousin hooked up a uni in about 4 hours (by we i mean he did it because it was his truck and i didnt want to mess anything up, but it seams like its not difficult) but remember our trucks still arent 8's so dont think they can handle a 150 shot stock (they might but i wouldnt risk that much personally)

well your right, just about every thing, most imports for sure, on our trucks though i have yet to find a spicific kit, you have to buy the "universal" kit and it sounds like you know how to hook this stuff up, and if you dont there will be general directions, the only kits ive seen used so far are kits for honda civics, but chevy s 10's aint so lucky, you have to cut and piece it together, take your time it will work fine, me and my cousin hooked up a uni in about 4 hours (by we i mean he did it because it was his truck and i didnt want to mess anything up, but it seams like its not difficult) but remember our trucks still arent 8's so dont think they can handle a 150 shot stock (they might but i wouldnt risk that much personally)


I was hoping zex had a kit it is kinda a safe way to go there kit has a lot of stuff in place to keep the shit from blowing you from hell and back

buy the uni kit, the same safty stuff just you have to custumize the length of hoses other then that im not sure but im 99% sure you will get all safty equipment