CD player Instalation

I’m going to install an aftermarket CD player in my friends 95 Grand prix. I haven’t even seen the regular radio cuz I haven’t had a chance to look at it and I was just wondering if I needed an installation kit to install the CD player. And also if theirs any special way too take out the stock radio. Thanks for the help

yes, you'll want to buy a fit-kit and wire harness, and an antenna adapter.

Here is the how to:
RADIO REMOVAL AND IN-DASH INSTALLATION:
NOTE: THE FACTORY RADIO PROVISION IS FOR M2000 STYLE GM CHASSIS
RADIO. AN INSTALLATION KIT IS REQUIRED FOR ALL AFTERMARKET
INSTALLATIONS. WE RECOMMEND THE USE OF A SCOSCHE GM1500
SERIES KIT.
1. REMOVE ASH TRAY.
2. EXTRACT (2) PUSH PIN STYLE FASTENERS ON THE BOTTOM SIDE OF
THE RADIO/DASH BEZEL WHERE IT CURVES UNDER THE DASH.
3. CAREFULLY PRY OUT ON THE DASH TRIM TO RELEASE (2) PANEL CLIPS
AND REMOVE THE DASH PIECE.
4. EXTRACT (2) 7 MM SCREWS HOLDING THE FACTORY RADIO, UNPLUG
CONNECTORS AND ANTENNA TO REMOVE RADIO.