I feel stupid

If one has the clutch adjuster set to hold the clutch lever in the up position while working on the car,
and you accidently hop in the car and push the pedal down

Now the clutch lever is down at its rest position and will not move but the engine will crank and run fine

What have I broken? :shakehead :shakehead :shakehead :shakehead :shakehead :shakehead :shakehead :shakehead :shakehead :shakehead :shakehead :shakehead :shakehead

After pondering ur problem, ive come to a conclusion. Ive narrowed it down.....its gotta be something wrong with the pedal assembly......lol

After pondering ur problem, ive come to a conclusion. Ive narrowed it down.....its gotta be something wrong with the pedal assembly......lol

The pedal moves fine

if I go under the hood and pull up on the clutch lever on the tranny it does not move

how hard did u pull on the clutch lever? because i know it's a bitch to move by hand, or atleast mine is.

how hard did u pull on the clutch lever? because i know it's a bitch to move by hand, or atleast mine is.

As hard as I could
enough to raise the car

yea you can't move mine with your bare hands


so you have the clutch cable hooked up and when you press in the clutch what happends?

Not enough info to go off of but if your putting a lot of pressure to pull the lever up then your tranny and all should be fine its something to do with your pedal assembly i would guess..What does the clutch pedal do when you hit it sink to the floor and stay or what need a little more info to tell what it is..

Now I feel even stoopeedure

I find that It moves as you say
with pedal and not with hand
wish me luk wit evrting els

lol