Keyless entry
dandicat
02-27-2002, 12:25 AM
HI!
I just got this Integra 2001 from an auto auction that came with a factory keyless entry remote from a different Integra.
Does onyone have any idea how to program that thing so I can use it with my car?
Any tips appreciated.
I just got this Integra 2001 from an auto auction that came with a factory keyless entry remote from a different Integra.
Does onyone have any idea how to program that thing so I can use it with my car?
Any tips appreciated.
Spunkymonkey
02-27-2002, 12:55 PM
Contact your local Honda dealership....or see an alarm specialists...but I'd say the honda dealership first, if its the factory remote your talking about.
Tireburner
02-28-2002, 08:26 AM
I checked my books, and they show for the CL and I think the TL was listed, but nothing for the Integra, which would lead me to believe either:
A- It is not factory
B- It is dealer programmable only
A- It is not factory
B- It is dealer programmable only
dandicat
02-28-2002, 09:34 PM
I did contact a local Acura dealer and found out that Integra does not come with keyless entry at all! Imagine that. Even Civic LX does.
So, I need to stick with an aftermarket remote.
Any brand suggestions anyone?
Thanks.
So, I need to stick with an aftermarket remote.
Any brand suggestions anyone?
Thanks.
Tireburner
03-01-2002, 08:06 AM
Keyless entry only?
DEI 710t
Keyless and alarm
Viper 300esp
WWW.DIRECTED.COM
DEI 710t
Keyless and alarm
Viper 300esp
WWW.DIRECTED.COM
Tireburner
03-01-2002, 08:17 AM
From an e-mail I recieved: Programming 2002 Trailblazer
1- Close all the vehicle doors
2- Insert the key into the ignition cylinder (do not turn on)
3- Press and hold the door unlock switch
4- While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
5- Release the door unlock switch. The doors will lock and unlock to confirm the program mode
6- Press and hold the LOCK and UNLOCK button simultaneously on one transmitter. After a delay of approx. 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
7- Repeat the previous step to program up to 4 transmitters.
8- Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter program mode.
9- Operate the transmitter(s) functions to verify proper operation.
1- Close all the vehicle doors
2- Insert the key into the ignition cylinder (do not turn on)
3- Press and hold the door unlock switch
4- While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
5- Release the door unlock switch. The doors will lock and unlock to confirm the program mode
6- Press and hold the LOCK and UNLOCK button simultaneously on one transmitter. After a delay of approx. 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
7- Repeat the previous step to program up to 4 transmitters.
8- Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter program mode.
9- Operate the transmitter(s) functions to verify proper operation.
Automotive Network, Inc., Copyright ©2025
