Bulb Output

PIAA H4 60/55W (135/125w. output)
PIAA H4 60/55W (110/100w. output)

Can our harness handle the 135/125w. output or should I be looking at only the 110/100w. output?

I'm pretty sure either will work just fine. I don't get how though, you would take 55 watts and have an output higher than that.. :confused: :confused:
Anyone know?

the 55w is the current draw so it wont mess up ur hareness the output is how much light the bulb can put out it has nothing to do with the current draw whioch is 55

The output is not what the bulb actually draws, i think the 55w is what the bulb, they only claim they produce 100w of output. Is that right guys?

My suspicion is that the 55w is the draw for low beam. The 60w is the draw for hi-beam. The 125/135 w (low, hi - beam, respectively) output is the light intensity (brightness). The higher the intensity is, the more heat generated in the housing vacuum for the bulb. Question is: will this heat generated due to light intensity cause severe damage to the harness or its associated connections? If the answer is no then any output figures will be just fine.

Do you have a pic of your ride, would like to check out that formula one tinting you got going on, havent seen it but damn that sounds cool. IM looking for light tints , not going for the real dark look myself.

Originally posted by taurus252
Do you have a pic of your ride, would like to check out that formula one tinting you got going on, havent seen it but damn that sounds cool. IM looking for light tints , not going for the real dark look myself.

Sorry I should have changed my signature. The FormulaONE performance tint film was done on the Maui Blue, which I rolled last year. I intend to come back to the same tint dealer for the same tint film but he didn't do good job so I am going with someone else. The film itself is awesome.

I will not have any picture of my ride until I am finished with all the mods. Will post it soon. CHeers.