A\c Panel Not Working

I was driving my 1996 Peugeot 306 Dt, suddenly I have noticed that the a\c wasnt working any more. I have tried all the fuses but they were all good. I think that the problem is the a\c knobs panel, from this panel I have changed a faulty DIODE k600 60amp which was acting as open. A\C back light works, but blower/ac/heater doesn`t work.

Any suggestions?

The mainboard of the panel has the following part number: GKR 9 140 012 237 E13.

The part number of the whole a/c compartment is GKR 9 140 010 209.

Thanks in advance.

HELLO,firstly when you switch the a/c on do you hear the compressor click in the engine when the engine is running?if not then the compressor is not activating because the a/c is out of gas due to a leak or the low pressure switch isn't working..but i would go with the first option.Is the a/c switch in the car the one you're talking about or the fan switch/turning knob not turning?if it is the later,that has nothing to do with a/c.
Basically if you have no cold air coming through your vents when you switch the a/c on then you are out of a/C GAS.

GOOD LUCK!

When i am switching the a/c, the compressor doesnt start. Even the fan/heater doesnt work. I think the problem is from the panel where the knobs are installed. what do you think?

Thanks In Advance.

have you been able to resolve this problem? Mine now has the same problem and I am thinking along the same lines, that the control panel is faulty.