well I finally did it!!!!!!!!!

A friggin month after I bought my new moto
I havr pulled my engine and have stripped it
I nevr thought I would get done :naughty:

now I am mounting shit on the new moto

I was wondering how important the exact torque is on the flywheel bolts
I dont have a t-wrench handy and was gonna make 'em real tight
would that be good enough or should I bustamove and get a t-wrench?


all comments, congrats, flames accepted and appreciated

If there not torqued the same the flywheel could crack rather easy. But I'v seen many engines built never using a torque wrench or plastiguage or anything that has lasted 120+ thousand miles.

I found a buddy to ride me to Harbor Freight
I am gettin a t-wrench


keep that feedback commin though

Gettin there

Getting the motomount off was hairy, pretty much wasted a nut but I got it going with a new socket and not it's on the new moto

I have the flywheel swapped and torqued
new clutch kit installed

but

I am having a time with getting the tranny back on
The shaft refuses to enter the clutch plate
I know it is the right one(the alignment tool fits in both old and new)

Does anyone know any tricks to ease the mating ?

just move it around back and forth, right and left it will just find its spot and slide right in.

What motor?

JDM D15B
Tranny from USDM D15B2

I figured I just need to keep wigglin it
(how many time have I heard that before :naughty: )

It aint fun though, the tranny aint lite, and the moto wont sit at a good angle

????


Guess I will just wiggle till it goes in :grinno:

mine did the same shit before. I ended up pulling the engine out to slide on the tranny. Had to make sure the tranny and motor was sitting up straight to make the tranny go in.

mine did the same shit before. I ended up pulling the engine out to slide on the tranny. Had to make sure the tranny and motor was sitting up straight to make the tranny go in.


I am gonna give a go again today

The moto is resting on a pallet and hung from a hoist, so it aint as imobilized (or verticle) as it could be


everybody say "penetration" at the same time and see if we can get a psychic thing goin

:lol2:

is it in yet?.....update

penetration has occured

I just got done wiping it down

gonna start mounting it now (I really like my moto ....lol)

Its fucking sad when you have to abriviate motor, you cant hit that one last letter? Is that so fucking hard to move your left index finger?

well if you want to get technical
it's an engine

motors use electricity, not petrol

:grinyes:

unless u r italian, ever hear of Moto Guzzi?

and think of all the poor little keys u hit just to tell me I didn't hit one:p

anyway

it is in!!!!!!!!!!!
all mounts bolted
:bigthumb: :bigthumb: :bigthumb: :bigthumb:
:bigthumb: :bigthumb: :bigthumb: :bigthumb:


more updates to follow

well if you want to get technical
it's an engine

motors use electricity, not petrol

:grinyes:

unless u r italian, ever hear of Moto Guzzi?

and think of all the poor little keys u hit just to tell me I didn't hit one:p

anyway

it is in!!!!!!!!!!!
all mounts bolted
:bigthumb: :bigthumb: :bigthumb: :bigthumb:
:bigthumb: :bigthumb: :bigthumb: :bigthumb:


more updates to follow






LOL:iceslolan

axels in

shifter reconnected (upside-down :uhoh: )

redoing that l8r


now all I have to do is get the dam hoist back to the rental place by 730am......grrrrrr

45/day is gonna eat mi azz

I shudda bought one for 150 at harbor freight


wishmeluk

Its fucking sad when you have to abriviate motor, you cant hit that one last letter? Is that so fucking hard to move your left index finger?


lol that was getting on my nerves too

lol that was getting on my nerves too



petty....petty peeps


oh well
at least you guys drive Hondas

:lol2: :lol2: :lol2:

it just i've never heard anyone call it a moto

it's like your from another country or something

it just i've never heard anyone call it a moto

it's like your from another country or something



it's all good.....


it was an incorrect abreviation anyway

like I said to Silent, it's engine not motor

so if I wanted to use a crazy abreviation, I should've said "eng"

lol

got the gear shift straight
got the x 'fold on

ever closer.... :smile: