Keyless entry 2000 Blazer
rfackmen
11-13-2004, 12:15 AM
I just purchase a 2000 4WD Blazer. Only one key came w/vehicle and NO fobs. It has keyless entry...no fob was included with the car. Dealer said previous owner didn't turn one in with vehicle. I have seen them for sale on ebay, however I don't know which ones to buy. What I need are the part numbers for a 2000 Chevy 4WD Blazer fob to purchase the correct ones.
With winter on the way and more than one driver for the vehicle the fobs would be a wonderful convience. Thanks in advance for help!
With winter on the way and more than one driver for the vehicle the fobs would be a wonderful convience. Thanks in advance for help!
davealex
11-13-2004, 12:34 PM
I also had the same problem,Chevy wanted 60.00 for the fob and 30.00 to program it. I bought one from Ebay with program instructions for less than 25.00 and it works perfect.Email me and I will link you to the company I dealt with.. Dave
Heli
11-18-2004, 01:44 PM
I have an extra fob but I need the instructions to program it. Can you help?
Regards,
Heli
Regards,
Heli
davealex
11-18-2004, 07:59 PM
I have an extra fob but I need the instructions to program it. Can you help?
Regards,
Heli
I can send you the instructions.Email me and I will tell you how to do it.Dave
Regards,
Heli
I can send you the instructions.Email me and I will tell you how to do it.Dave
BlazerLT
11-18-2004, 10:59 PM
I just purchase a 2000 4WD Blazer. Only one key came w/vehicle and NO fobs. It has keyless entry...no fob was included with the car. Dealer said previous owner didn't turn one in with vehicle. I have seen them for sale on ebay, however I don't know which ones to buy. What I need are the part numbers for a 2000 Chevy 4WD Blazer fob to purchase the correct ones.
With winter on the way and more than one driver for the vehicle the fobs would be a wonderful convience. Thanks in advance for help!
I would have negotiated this into the truck purchase.
With winter on the way and more than one driver for the vehicle the fobs would be a wonderful convience. Thanks in advance for help!
I would have negotiated this into the truck purchase.
cobra1
11-19-2004, 05:59 AM
I just purchase a 2000 4WD Blazer. Only one key came w/vehicle and NO fobs. It has keyless entry...no fob was included with the car. Dealer said previous owner didn't turn one in with vehicle. I have seen them for sale on ebay, however I don't know which ones to buy. What I need are the part numbers for a 2000 Chevy 4WD Blazer fob to purchase the correct ones.
With winter on the way and more than one driver for the vehicle the fobs would be a wonderful convience. Thanks in advance for help!
part# 15732805
to program.....and you can have up to 4 remotes.
With the driver door closed, hold down the power unlock button on the door panel.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Release the power unlock button on the door panel. The remote control door lock receiver will respond in the following manner in order to indicate that the receiver is in the programming mode:
Locking the doors
Unlocking the doors
Important
All extra transmitters must be programmed at this time. When a new transmitter is programmed, the old transmitters will be deactivated.
Hold down the lock and unlock buttons on the transmitter until the remote control door lock receiver will respond in the following manner:
Locking the doors.
Unlocking the doors.
Repeat step 7 for each additional transmitter.
Turn the ignition switch to the ON position in order to exit the transmitter programming mode.
With winter on the way and more than one driver for the vehicle the fobs would be a wonderful convience. Thanks in advance for help!
part# 15732805
to program.....and you can have up to 4 remotes.
With the driver door closed, hold down the power unlock button on the door panel.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Release the power unlock button on the door panel. The remote control door lock receiver will respond in the following manner in order to indicate that the receiver is in the programming mode:
Locking the doors
Unlocking the doors
Important
All extra transmitters must be programmed at this time. When a new transmitter is programmed, the old transmitters will be deactivated.
Hold down the lock and unlock buttons on the transmitter until the remote control door lock receiver will respond in the following manner:
Locking the doors.
Unlocking the doors.
Repeat step 7 for each additional transmitter.
Turn the ignition switch to the ON position in order to exit the transmitter programming mode.
minister41
11-23-2004, 07:08 PM
I have a 1995 blazer. It is loaded. I bought it used, so I don't know if I have keyless entry or not. Does anybody know if I should have it already. Or give me some way of checking.Thanks.
BlazerLT
11-23-2004, 08:01 PM
It does.
minister41
11-24-2004, 05:05 PM
It does.
Is this answer to my question? How do I check? I wouls hate to buy the remotes and it be a waste. Thanks
Is this answer to my question? How do I check? I wouls hate to buy the remotes and it be a waste. Thanks
BlazerLT
11-24-2004, 05:20 PM
Because I own a 1995 Blazer Loaded and it has it.
minister41
11-24-2004, 07:07 PM
Because I own a 1995 Blazer Loaded and it has it.
Thanks man
Thanks man
BlazerLT
11-24-2004, 08:41 PM
No problem.
rfackmen
11-26-2004, 09:12 AM
Thanks cobra1!
talonx
11-27-2004, 06:31 PM
Will that P/N work on a 99 blazer?
Is that the standard FOB?
Is that the standard FOB?
goodwrencher
03-18-2005, 08:09 PM
this works but our bravada won't start. any ideas?
to program.....and you can have up to 4 remotes.
With the driver door closed, hold down the power unlock button on the door panel.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Release the power unlock button on the door panel. The remote control door lock receiver will respond in the following manner in order to indicate that the receiver is in the programming mode:
Locking the doors
Unlocking the doors
Important
All extra transmitters must be programmed at this time. When a new transmitter is programmed, the old transmitters will be deactivated.
Hold down the lock and unlock buttons on the transmitter until the remote control door lock receiver will respond in the following manner:
Locking the doors.
Unlocking the doors.
Repeat step 7 for each additional transmitter.
Turn the ignition switch to the ON position in order to exit the transmitter programming mode.[/QUOTE]
to program.....and you can have up to 4 remotes.
With the driver door closed, hold down the power unlock button on the door panel.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Release the power unlock button on the door panel. The remote control door lock receiver will respond in the following manner in order to indicate that the receiver is in the programming mode:
Locking the doors
Unlocking the doors
Important
All extra transmitters must be programmed at this time. When a new transmitter is programmed, the old transmitters will be deactivated.
Hold down the lock and unlock buttons on the transmitter until the remote control door lock receiver will respond in the following manner:
Locking the doors.
Unlocking the doors.
Repeat step 7 for each additional transmitter.
Turn the ignition switch to the ON position in order to exit the transmitter programming mode.[/QUOTE]
michellesmark01
04-27-2005, 09:41 PM
Hey you guys, thanks for helping me previous w/the problem w/the keyless entry... but I bought one off of ebay and the part # is 15732805 just as was shown in the post I replied to. IT'S NOT WORKING!!! WHYYYYYYYY?? I can't figure it out!! I've tried several times and it's just not working... Any suggestions???
chris15706
04-28-2005, 01:27 AM
Did it come with programming instructions?
cobra1
04-28-2005, 03:59 AM
does your Blazer have the receiver?
if not, the remote wont do you any good.
if not, the remote wont do you any good.
michellesmark01
04-28-2005, 12:20 PM
Did it come with programming instructions?
No unfortunately no programming instructions came w/it... I don't know what to do. Under the dash it has a kill switch that I tried activating the alarm w/ and that wouldn't work. It wouldn't come on.
No unfortunately no programming instructions came w/it... I don't know what to do. Under the dash it has a kill switch that I tried activating the alarm w/ and that wouldn't work. It wouldn't come on.
michellesmark01
04-28-2005, 12:21 PM
does your Blazer have the receiver?
if not, the remote wont do you any good.
Where would the receiver be?? I know that there's a kill switch that I found and deactivated the alarm w/.
if not, the remote wont do you any good.
Where would the receiver be?? I know that there's a kill switch that I found and deactivated the alarm w/.
cobra1
04-29-2005, 10:39 AM
the factory keyless receiver is mounted on the drivers side hush panel under the dash. its gonna be in the left corner close to the parking brake release. its a small black box.
the programming instructions for the factory remote are posted in this thread on the first page.
if you have an alarm and a kill switch, thats most likely aftermarket.
the programming instructions for the factory remote are posted in this thread on the first page.
if you have an alarm and a kill switch, thats most likely aftermarket.
Jergin01
04-29-2005, 05:26 PM
when I bought my 2000 it had a remote entry, but if you push down unlock and lock together it starts. Guess the dealer didn't know that one.
BlazerLT
04-29-2005, 11:26 PM
when I bought my 2000 it had a remote entry, but if you push down unlock and lock together it starts. Guess the dealer didn't know that one.
That is aftermarket.
That is aftermarket.
Automotive Network, Inc., Copyright ©2026