Sensor 1, Bank 1.
1996GMCJimmy
11-12-2004, 10:55 AM
Hello,
I recently had my 1996 GMC S-15 Jimmy checked out because of a SERVICE ENGIGE SOON light, it turned out the proble is the Snsor 1, Ban1 that needs replacement. I know its an O2 sensor that needs replacement, but can anybody let me know where this SENSOR 1, BANK 1 sensor is localted? Thanks a lot!
I recently had my 1996 GMC S-15 Jimmy checked out because of a SERVICE ENGIGE SOON light, it turned out the proble is the Snsor 1, Ban1 that needs replacement. I know its an O2 sensor that needs replacement, but can anybody let me know where this SENSOR 1, BANK 1 sensor is localted? Thanks a lot!
Jeremy-WI
11-12-2004, 06:59 PM
Follow exhaust on the drivers side of the engine from the exhaust manifold back, it will be the first one.
In case you want to know Bank 2 sensor 1 is the closest to the engine on the passenger side
Bank 1 sensor 2 is the one between the y pipe and catalytic converter and bank 1 sensor 3 is the one between cat and muffler. This info is for a single cat exhaust which was pretty much standard on the 4.3 or 5.0
In case you want to know Bank 2 sensor 1 is the closest to the engine on the passenger side
Bank 1 sensor 2 is the one between the y pipe and catalytic converter and bank 1 sensor 3 is the one between cat and muffler. This info is for a single cat exhaust which was pretty much standard on the 4.3 or 5.0
1996GMCJimmy
11-12-2004, 08:21 PM
Jeremy-WI,
Thank you so much! Your input helps a lot, especially knowing where the rest of these sensor are also located.
Thank you so much! Your input helps a lot, especially knowing where the rest of these sensor are also located.
BlazerLT
11-12-2004, 10:15 PM
What did the code say?
Not all O2 sensor codes mean you have to replace the sensor.
Not all O2 sensor codes mean you have to replace the sensor.
1996GMCJimmy
11-15-2004, 06:48 PM
What did the code say?
Not all O2 sensor codes mean you have to replace the sensor.
************************************************** **
Hello BlazerLT:
The code read as follows:
P0133
O2 Sensor CKT Slow Response (Bank 1, Sensor 1)
Thank you for your input!
Not all O2 sensor codes mean you have to replace the sensor.
************************************************** **
Hello BlazerLT:
The code read as follows:
P0133
O2 Sensor CKT Slow Response (Bank 1, Sensor 1)
Thank you for your input!
BlazerLT
11-15-2004, 09:24 PM
Welp, in this case, yes, looks like the O2 sensor is lacking a lot.
Swap it out.
Swap it out.
Automotive Network, Inc., Copyright ©2026