a little hose help 96 gsr into a 99 teg ls

almost done with the swap. all i need to do is torque a couple bolts and hook up my exhaust and run a couple hoses and im finished!! so my question is, there is a nozzle coming out of the upper radiator hose connector on the block under the vtec solenoid and i dont know where it is supposed to run to. heres a pic...

http://www.hondaswap.com/forums/uploads/1099858173/gallery_23913_188_1100122519.jpg

the inlet on the tb facing the firewall is going to the iacv and from the iacv i have a hose going to here on the tube connecting the thermostat housing and the water pump

http://www.hondaswap.com/forums/uploads/1099858173/gallery_23913_188_1100122585.jpg

the other inlet on the tb is going from here

http://www.hondaswap.com/forums/uploads/1099858173/gallery_23913_188_1100122535.jpg

to here (note: its the hose coming from the top of the pic)

http://www.hondaswap.com/forums/uploads/1099858173/gallery_23913_188_1100122552.jpg

i am not sure if the hoses on the tb are right. i looked at my friends itr and used that as a guide

Here ya go ;)
http://bellsouthpwp.net/w/h/whtteg/GSR_coolant%20hoses.jpg