B2200.....won't start

Have a 1988 B2200 p/u....replaced battery, starter, and alternator.....still won't start....have power but when I turn the key nothing! ...any suggestions?...thanks

Get a jumper wire to jump start the starter solenoid. About 3 ft. long.

Put the truck in neutral.
Engage the park brake.
Chock the wheels.
Turn the ignition switch on
Put one end of the jumper wire in positive terminal of battery.
Put the other end of jumper wire to starter solenoid to start the engine.
Once started, remove the jumper wire. This is momentary only.


If it starts, then your ignition switch starter contact is bad.
If it does not start, your starter solenoid is bad.

Alos check the neutral safety switch on the clutch

try checking the 80 amp fuse. mine went out on me and it wouldn't start either.