keeping stock tweeters?

i just bought a set of 4x6s for my front doors and i still want to get sound from the stock tweeters in the pillars. im wiring the new speakers right to my aftermarket head unit, (so im not using the factory amps). any advice on how i should do this?

You would have to buy a crossover. Set the tweeters for high frequencies and the front speakers for semi-high.

Originally posted by frogg
You would have to buy a crossover.

Passive crossover.

ok i need crossovers. but how would i go about wiring the tweeters into the whole entire system? should i just parallel them with the 4x6s, or what?

If you run your tweets in parallel / series (I still get them confused) with your mids (4x6) you'll need to install bass blockers for your tweets..

Originally posted by flyg20
ok i need crossovers. but how would i go about wiring the tweeters into the whole entire system? should i just parallel them with the 4x6s, or what?

When you buy the crossover, there are seperate terminals for the tweeters and for the woofers, So there will just be a +/- input. a +/- Tweeter, and a +/- woofer/mid.