2004 receiver installation, please help.

Hi I am trying to install a new receiver and have the necessary kits and all. So far I have the cover for the shifter, and the climate control cover both removed. The next step is to get the radio/ac assembly out, but I can't get it out very easily...

I am jut wondering if there is a trick to it or something I am missing. Please help, thanks!

-KDX

oh wow, nevermind...I finallly go it...thx!

Excerpt from Manual.

14. REMOVE INSTRUMENT CLUSTER FINISH PANEL
(a) Remove the screw<J>.UNDER MIDDLE KNOB.
(b) Using a screwdriver, disengage the 4 clips and 4 claws,
then remove the instrument cluster finish panel.
HINT:
Tape the screwdriver tip before use.
(c) Disconnect the connectors.
NOTICE:
Do not pull the lid of auxiliary box.
15. REMOVE INSTRUMENT CLUSTER FINISH PANEL
SUB–ASSY CENTER
(a) Remove the 4 screws<K>.( Along Bottom of Radio garnish)
(b) Using a screwdriver, disengage the 2 clips and 4 claws,
then remove the instrument cluster finish panel sub–assy
center with radio receiver assy.
HINT:
Tape the screwdriver tip before use.
(c) Disconnect the connectors.
16. REMOVE GLOVE COMPARTMENT DOOR ASSY
(a) Remove the screw<I> from the glove compartment door
stopper sub–assy.
(b) Deform the upper part of the glove compartment door
assy to release the stoppers.
(c) Pull the glove compartment door assy upward to remove
it.

Outthere Too..