installing cd player in 92 hatch
prototype80
11-05-2004, 07:27 PM
just wondering if anyone has a wiring diagram for a factory honda civic wiring harness so i can hook up my cd player. i have got a kenwood kdc-319 , which i got off ebay. the wires have one solid and one with a stripe . i was wondering which one of these is positive and which one is negative. oh and i have 3 wire colors for positive and ground red black and yellow. for some reason the red wire is twisted to the yellow and the black is left flapping. so i am wondering which is whichyellow and red hot or black hot and red and yellow ground. they didnt label this stuff so i dont know. im an idiot at this stuff. oh well :loser: :confused:
AudioGuy93DelSol
11-10-2004, 10:54 PM
There should be a sticker on the stock radio with the wire designations. The stripe is negative, solid is positive. Black is ground, yellow is constant power, red is switched power. Blue with a white stripe will be amp turn on, solid blue is power antenna. (correct me if im wrong) Hope that helps
prototype80
11-11-2004, 02:09 PM
thanks i'll check it out
GScivic7
11-11-2004, 05:48 PM
it's easiest to just get a wiring harness, shouldn't cost more than $15 at the most.
gunnmen01
11-14-2004, 10:39 AM
yeah buy a wire harness adaptor from best buy or somewhere like that and buy one... makes it much cleaner and easier...
gunnmen01
gunnmen01
5thGenAccord
11-15-2004, 12:40 PM
5thGenAccord
11-15-2004, 12:41 PM
oh yeah and dont forget about the harness.
Automotive Network, Inc., Copyright ©2026
