Our Community is over 1 Million Strong. Join Us.

Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Grain-Free, Zero Fillers


=]... i finally got a Tamiya Ferrari Enzo


g00eY
11-02-2004, 07:47 PM
just thought that i would share since im very happy about getting the kit. i got it for 1/2 off, too. i got the Giallo Modena one. i really wanna get it started but im still kinda noob with some modeling stuff(like i havent painted a car body yet... ever... but i will get some done soon) and its starting to get cold here and i usually work outside on this table thing i have set up in my garage. i was also wondering if Testors makes a decal setting solution and if its any good(i dont like ordering stuff online and i find Testors stuff easily around here).

thanks

minniebanister
11-02-2004, 07:56 PM
i was also wondering if Testors makes a decal setting solution and if its any good(i dont like ordering stuff online and i find Testors stuff easily around here).

thanks
http://www.testors.com/catalog_browse.asp?ictNbr=14

g00eY
11-02-2004, 08:03 PM
thanks for the reply

do you kno which one would be used for large decaling jobs and if its any good?

rx7king
11-02-2004, 08:38 PM
cool to hear that you got it, i have one, and im gonna go buy two more saturday:smile:

proosen
11-02-2004, 11:58 PM
I don't know about the Testors decal solvent. I use Microscales two-stages products, Micro Set and Micro Sol and they are just great. If nothing else, get your hands on a couple of these bottles. The Enzo is a fantastic piece of model engineering, nothing to warn you of, just take care reading the manual thoroughly though. There is a lot of places that is going in body colour that isn't that obviuos. Good for you the body panels are many so you don't need to paint a whole body in one go with this one :grinyes:

Good luck!
Niclas

g00eY
11-03-2004, 06:29 PM
ill go search around from some Microscale stuff. i hope i can find some around where i live so i dont have to order online.

StephenDeli
11-03-2004, 08:05 PM
Good luck with your Enzo, Im scared to death of mine!

Scale-Master
11-04-2004, 09:21 AM
While it may be an itimidating kit at first glance, it fits very well and when built straight out of the box makes an impressive piece. You may want to practice body painting on another kit, too much paint on the Enzo could cause some minor fit problems with the opening parts.

Testors does make a solvent, but it is mostly just acetic acid.

I've had great luck with, and prefer Gunze Sangyo's Mr. Mark Softer decal solvent. It's not too hot, but with just a little patience will still soften almost all decals to the desired pliability. I do a LOT of decalling and a $5.00 bottle lasts me a couple years... Good luck on the Enzo. - Mark

g00eY
11-04-2004, 06:11 PM
thanks for all the help.

im pretty scared of mine, too, but now that i have it i figure i gotta build it sometime. i have 4(?) other kits that need paint so i will have some practice on painting before the Enzo. the question for the decal solvent was basically for my CLK DTM since i dont think going without decal solvent would be a very smart decision. So ill be looking around for some solvent soon.

JTRACING
11-04-2004, 06:19 PM
I built that DTM car. the decals are relly good and I didnt use hardley any micro-sol, only around the front where the decal goes over the cut-outs in the front fenders. I mostly used a hair dryer and that seemed to work great.

g00eY
11-05-2004, 06:36 PM
Yea, im pretty sure i remember not only seeing it in that thing under the post with the pictures and stuff(lol... i forgot what its called) but also asking you about it. im pretty sad about the car cuz i accidently cut the edge of one of the large decals about a centimeter or so with my knife... argh. plus im not a pro with decals. i got my window decals to look nice but my spoiler is a little tiny bit bubbly and sticks up a little. the decal solvent would make it stick better, right?

Vric
11-05-2004, 07:39 PM
Testor decal stuff is... well it's crap.

get Microscales, it work great and cost less than 3$ on modelexpress.net (and a bottle will last few model)

g00eY
11-06-2004, 02:35 PM
yea... i expected that the Testors stuff wouldnt be so great, but i just asked cuz its probably easier for me to get where i live. going to that website now.

mike@af
11-06-2004, 04:13 PM
A good majority of testors products are too great. Cant wait to see the progress.

godfather23
11-07-2004, 07:17 AM
You definately need to use solvent. Itīs like turning your modeling upside down. When you worked before wihtout solvent, it will open your eyes on how easy it is to make difficult decal jobs work fine. Iīll never put one decal onto a model again without using decal solvent.

Add your comment to this topic!


Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food