Mazda b2200 hotwire!!!! Help

I just bought a mazda b2200 from a friend with a 3 inch body drop and bagged. He started building the truck but went belly uo! My problem , no key. The dash has already been taken out as well as the coloum and I can get to the ignition with no problem. Anyone kmnow how to hotwire this truck so I can see if it runs or not. Please help!!!!!!!!!

Hey turd-brain, wrong forum.

Whoops, We Have A Straggler..... Quick Get My Shotgun!

look under the dash, at the end of the ignition should be some soudered on wires, cut them off the soudering, then bust out some wire strippers and strip all the wires, then take one wire, it doesnt matter which one because ur gonna have to guess anyway, and then touch the end to the other wires ends, What you are looking for is the dash lights to come on or the stereo lights to come on, this is called the power wire. When you have found that twist them together. Now what you want to do is take the the end of the wires you just twisted together and touch them to all of the other wires(remember Do NOt hold the wire on the other wires that long!!!) as soon as you touch the twisted wires to a certain wire you will hear the engine turn over. Now keep them touched JUST ENOUGH to get the car started! there you go you have hot wired a car, but now the question is can you drive it?? next thing your going to have to do is break the steering lock.. good luck :)

giving advice on hot wiring a car...hmm.

wrong forum, dumbass.