turbo mani ?

ok i have a 95 tsi with a rs45 t/3 t/4 hybrid turbo ...with a srock mani thats ported, my question is is there a better manifold i can buy and wich will fit my turbo

Since you're a 2g, just keep your stocker and port the hell out of it. It will most likely flow plenty for you, as it does for many many others :) . Spend your money elsewhere!

Yeah, there really isnt much else you can do. You have to stick with cast stock type manifolds (1g/2g/EVO3/SBR) or risk it with some shyte tubular mani that has a stock flange on it. MAybe some decent ones have come out since I last looked, but at any rate the stocker still flows very well. People have run 9s on them. Not to say that a good tubular wont do a little better even in the 13s, but its probably not going to be a gain that will justify the price until you are moving a lot more air.

Since you're a 2g, just keep your stocker and port the hell out of it. It will most likely flow plenty for you, as it does for many many others :) . Spend your money elsewhere!
its allready been ported

its allready been ported


Well then you're good to go! :)

its allready been ported


There are differing levels of porting. Ported in a hurry by some shyte backwoods shop may not be the same as "porting the hell out of it." I would make sure its acceptable, and if it is, start looking elsewhere for power.