dizzy question

will a d15b2 dizzy fit on a 93 civic without mods?

I would say it would fit but I don't know if will interface with the 93 harness correctly :confused:

Depends, d15b2 from an 88-91 or from a 92-95? if from 88-91 I dont believe so... obd0 to obd1

no it wont. the mounting bolts are diff. you can cutt to make fit. but not sure about the plugs

Depends, d15b2 from an 88-91 or from a 92-95? if from 88-91 I dont believe so... obd0 to obd1


They never made a 92-95 d15b2??
WTF???? um yeah you might mean a d15b7, found in 5th gen lx/dx's....

No they wont work, besides being obd0 and the 93 is obd1, its a dpfi distributor. So quite simply NO!!!!

crappy, i coulda sold my old dizzy

thanx guys

to answer the original question, yes it will technically fit, but as they said, it wont plug in.

D15B1, D15B2, D15B6, D15B7, D15B8, D16A6, D16Y5, D16Y7, & D16Y8 all have the same distributor mounting points.

no. ur wrong. you need to cutt to make a obd0 dizzy to fit the obd1-2 motors.they dont mount up the same. yes ur right that they will not plug in.you cant make a y7 dizzy work on y8.just like all the others


ok. hole for hole yes. butt the camm and the dizzy are angle diff at top dead.the obd1 dizzy is angled

no. ur wrong. you need to cutt to make a obd0 dizzy to fit the obd1-2 motors.they dont mount up the same. yes ur right that they will not plug in.you cant make a y7 dizzy work on y8.just like all the others


ok. hole for hole yes. butt the camm and the dizzy are angle diff at top dead.the obd1 dizzy is angled

yeah okay, dont try to call me out on something you have no clue about buddy. the only d series engine with a different bolt pattern is the d16z6 and possibly the d15z1. a d16y8 and a d16y7 (OBDII) engines will fit an OBD0 distributor directly, as well as the d15b7, & d15b8 engines which are OBD1.

I've had no problems whatsoever running an OBD0 distributor on a Y7 and Y8 head with no timing problems whatsoever. As well as a d15b7 head. and the d16z6 will work with minimal mods and the distributor still sits straight upwards like OBD0.

so now it will fit his 93 DX?? how hard would it be to re-wire it?

so now it will fit his 93 DX?? how hard would it be to re-wire it?

I was saying, technically, it will bolt on, but since its an 88-91 DX distributor, i.e. DPI, it does not have the required sensors for an MPFI setup, in addition to the sensors inside being non compatible between obd generations

I was saying, technically, it will bolt on, but since its an 88-91 DX distributor, i.e. DPI, it does not have the required sensors for an MPFI setup, in addition to the sensors inside being non compatible between obd generations


oh ok then lol

relax 91civicdude.you dont know everything.you dont know me and what i know. so dont type like ur the shit.lates

i type like i know what im talking about, because i do.

there's enough male ego in this post to choke a person!

let's play educate the noob:

what on earth is a "dizzy"

is that "distributor"?

roger that

oh. heh. i feel dumb and smart at the same time.

haha. yeah. some people are so full of them selfs that they forget what this forum is about. to help out other people that need helping.not to fight about some shit.ego is the prob tho.in about a couple of mins i'll get a post from this guy. ten bucks us.who wants in.angry and all :grinno::grinno::grinno::grinno::grinno::grinno::g rinno::grinno::grinno::grinno::grinno::grinno::gri nno::grinno::grinno::grinno::grinno::grinno::grinn o::grinno::grinno::grinno::grinno::grinno::grinno: :grinno::grinno::grinno::grinno::grinno::grinno::g rinno::grinno::grinno::grinno::grinno::grinno::gri nno::grinno:
i hope that helps!

Guys, be easy on the newbie.

The term "dizzy" does refer to the Distributor.
Just like "tranny" refers to the Transmission.