break problem

Just as i thought that all my problems have been resolved.. my break on the passanger side (can't figure out if it's the front or back) started making noises.... it sounds as thought it's warped... but doesn't feel it. the sound is Very very loud. All the rotors and pads on the car were replaced 1000km ago, and i'm losing my mind as to why this noise comes out... this noise comes out.. only when i press on the break lightly and when the car is going slow (slower than 40mph). This is a 92 crown victoria... have any of you had this issue in the past before? if so what was it?

Is it a Squeal or a Clicking noise?

I know on my wife's 99 I replaced the pads with ceramic. I will never go back. They cost $30 more than the semi metallic. The old pads SQUEALLLLLED and drove me crazy. These are like new and seem to stop better too. This probably doesn't help any.

Take the rear rotors off,and check the emergency brake shoes.they tend to fall apart.If it has rear disk brakes,then it has a set of drum brake style brake *shoes* hiding behind each rear rotor.The rear has two seperate sets of brakes,one for driving and one for the emergency brakes.

I just replaced my brake pads and rotors and I hate these semi-metalic pads, this is more anoying than the rivet to rotor grinding i had before i changed them!