remote keypad lost
surferfletch
10-29-2004, 08:48 PM
Too miffed at my kid to research this...
It's gone and I need a new one. How, where, how much?
Thanks.
It's gone and I need a new one. How, where, how much?
Thanks.
surferfletch
10-29-2004, 10:43 PM
Can get a new one here for $60 + $5 shipping:
http://onlyremotes.com/subcat106.htm
Anyone tried these guys?
Calling St. Charles tomorrow. I just ordered two hood bumper stops from them for $3 something each.
http://onlyremotes.com/subcat106.htm
Anyone tried these guys?
Calling St. Charles tomorrow. I just ordered two hood bumper stops from them for $3 something each.
amigo-2k
10-29-2004, 11:28 PM
I think a lot of folks have luck with the ones on ebay.
megavolt121
10-29-2004, 11:54 PM
Go get one on ebay. I got three of them for a Trooper(which conveniently also work for my Rodeo). They come out to around 20-25 a piece.
Program them yourself:
'98 - '02 Isuzu Rodeo and Trooper (with factory keyless entry) Instructions for programming
1. Get in car and make sure all doors are unlocked.
2. Open driver's door and leave open.
3. Put key in ignition.
4. Turn key to 'on position' (dash lights on, but do not start) and back to 'off position' 3 times in 5 seconds or less. (you must turn the key very fast)
5. Close and open driver's door 2 times in 5 seconds or less.
6. Turn key to 'on position' and back to 'off position' 5 times in 5 seconds or less. (turn key very fast)
7. Close and open driver's door the doors should lock and unlock twice after this happens push the lock or unlock button on the remote, doors will lock and unlock. Push the lock or unlock button a second time and doors will lock and unlock again. You are finished! The above sequence erases all previous codes and adds the new code as #1.
If you are adding a second remote, you should follow the same sequence with the exception of step 6; instead of turning the key to the 'on position' and back to the 'off position' 5 times in 5 seconds or less, do it 3 times in 5 seconds or less and then continue to step 7.
***Remember to turn the key to the on and off position very fast
Program them yourself:
'98 - '02 Isuzu Rodeo and Trooper (with factory keyless entry) Instructions for programming
1. Get in car and make sure all doors are unlocked.
2. Open driver's door and leave open.
3. Put key in ignition.
4. Turn key to 'on position' (dash lights on, but do not start) and back to 'off position' 3 times in 5 seconds or less. (you must turn the key very fast)
5. Close and open driver's door 2 times in 5 seconds or less.
6. Turn key to 'on position' and back to 'off position' 5 times in 5 seconds or less. (turn key very fast)
7. Close and open driver's door the doors should lock and unlock twice after this happens push the lock or unlock button on the remote, doors will lock and unlock. Push the lock or unlock button a second time and doors will lock and unlock again. You are finished! The above sequence erases all previous codes and adds the new code as #1.
If you are adding a second remote, you should follow the same sequence with the exception of step 6; instead of turning the key to the 'on position' and back to the 'off position' 5 times in 5 seconds or less, do it 3 times in 5 seconds or less and then continue to step 7.
***Remember to turn the key to the on and off position very fast
surferfletch
10-30-2004, 02:30 AM
Thanks a lot! I'm going to give my kids a couple more days of looking before I get 2 new ones. Glad to know I can get 2 for less than the price of one on the other site.
By the way, this Rodeo forum has really become busy in the last year or so. Thanks for all the help!
By the way, this Rodeo forum has really become busy in the last year or so. Thanks for all the help!
surferfletch
10-30-2004, 02:40 AM
Found '98+. Still looking for '97...
surferfletch
10-30-2004, 08:25 AM
Found some used ones... not in great shape...
Automotive Network, Inc., Copyright ©2026