remote starter help

Hi

I just bought a Pro Start 3200 remote starter kit for my 1995 Hyundai Accent. And the thing is I don't have the wiring color codes for my car.
So i don't know where to start with the wiring of this system. Can someone please provide me with some assistance especial where to find the negatice ECM wire. And on what wire should I connect the parking light output if I have daylight running light system in my car.

Thanks in Adcance

goto www.bulldogsecurity.com and look up your car's info on there.

let me know how you remote starter works. I am thinking about buying one at ciircut city and having them install it

Thanks ponchonutty

For providing that link. It was really helpful. One question is the ProStart module requires a negartive tach signal, there is no specification on whether the white tach wire from the ignition coil for my car is - or + would it cause a problem? how can i check it? I do not want to risk damaging my module, with reverse polarity.

Regards
Twin_Peaks

Thanks ponchonutty

For providing that link. It was really helpful. One question is the ProStart module requires a negartive tach signal, there is no specification on whether the white tach wire from the ignition coil for my car is - or + would it cause a problem? how can i check it? I do not want to risk damaging my module, with reverse polarity.

Regards
Twin_Peaks
It should be OK which ever you use but most of the cheaper units do not like learning fuel injectors. That's why I stuck with DEI remote starters. I have not had any problems getting any of them to work in any vehicle including diesels.

Thanks ponchonutty

The remote starter worked fine. I took a while to complete this install because it's been so cold here lately. The next task I have is installing a CD head unit. But the thing is when I try to remover the bezel where the stack radio is it will not come out. Do you have any idea how I can remover the Anti-Theft radio from the 1995 Hyundai Accent.

Regards