what else do i need for turbo?

ok, I looked around on ebay and found the following

BOV - http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=1806490278 - 195 shipped

Audi 5000 IC - http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=1805314365 - about 75 bucks shipped

DRAG manifold - http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=1805111732 - about 400 shipped

Turbonetics delta wastegate - http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=1805326457 - about 200 shipped

Garret T3 turbo - http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=1805876187 - 450 shipped

Vortech FMU - http://cgi.ebay.com/ebaymotors/aw-cgi/eBayISAPI.dll?ViewItem&item=1806800769 - at most 100 shipped


I can have the intercooler piping made from exhaust pipe right? I can have it for like 24 cents a foot and bending for free


and is that turbo big enough for a 1.8 DOHC non vtec, I heard a guy say on his prelude with like .5 something turbine or whatever it was done at like 6 grand, this is like .48 or something. the prelude is 2.2 so I dont know.

is that all I need

I'll sell you my FMU for $80 shipped, but you don't need that fuel line for a Honda. They are usually $180 new and don't come with that line unless it's a domestic application (supercharged) and have the special fuel rail connectors. Just splice the hose coming from the fuel pressure regulator and the return line and hook the FMU up and VIOULA!! (I think I spelled it right). Check out my site.

http://home.satx.rr.com/importvelocity/

Originally posted by 94tegRS

I can have the intercooler piping made from exhaust pipe right? I can have it for like 24 cents a foot and bending for free


Where can you get Ic piping for 24 cents a foot at??? Hook me up!

add a check valve, downpipe and a fuel pump to that too.

well, thats how much I can get exhaust pipe for and figure it will work, and only I can get it for that from this place, I grew up with the kid so I get stuff at cost.