Our Community is 940,000 Strong. Join Us.


Here's another 02 Blazer question.


robsieb
10-20-2004, 09:50 AM
How do you replace a burnt out light in the door lock switch? Do you have to replace the whole switch or just a bulb. In either case, is there a special tool to remove the wire connectors?

hunter01
10-20-2004, 01:49 PM
You should be able to carefully pry up on the front edge of the switch plate, and then slide the assembly foreward and lift to see what the parts look like. GM does make an electrical connector removal tool,not sure of the part number. You should be able to use a small flat tip screwdriver to gently pry back the plastic retainer to remove the connector. PS. Disconnect neg batt terminal before working on electrical components. Hope this helps.

hunter01
10-20-2004, 02:33 PM
Lisle makes an electrical connector seperator Part #13120

robsieb
10-20-2004, 02:46 PM
Thanks for the info. Any ideas on if you can change just a bulb or the whole switch?

Add your comment to this topic!