wheel fit question

Hi ,
I have a set of 15" stock aluminum factory wheels off a 1994 blazer s-10 4X4. Will these fit my 91 S-10 4cyl 2WD pickup?
Thanks

no they won't. they have different back spacing

Any idea how much os a spacer would be needed?

i was going to ask a question about this to, i see it here so ill ask. what is the most back spacing. i have 2wd 95 s10. i want to put wider tires on it, not little 7 inch wide stock.

I have a question also. Will my 15" stock aluminum factory wheels from a 1991 S-10 Blazer 4X4 2dr fit my 2002 S-10 Blazer 4X4 4dr?

luckycharm, just go with some camaro iroc rims or something, those always look good, and they come 8 in wide. hunter, check this page out http://home.earthlink.net/~seapahn/4x4.htm That might be of some interest.

iroc rims would look ok. i kinda wanted to put on cragars and bring back the old school look.

Guys, let's not whore this thread on 91red. This is his thread.

91red, I would find some rims for a 2wd and don't go the spacer route. Iroc or camaro rims are a direct bolt on for a 4x4 and not for a 2wd.

BlazerLT, I think it depends on if you use the fronts or the backs on the IROC rims (for those that don't know, yes it does matter). I have them on my car, but I can't remember which you would want to use. I think fronts...
I don't think you can use 4x4 rims on a 2x4, but you can use 2x4 on 4x4, you just might have rubbing issues and they will stick out.

Yes,

For a 4x4, 1993+ camaro, firebird and corvette wheels will fit.