over head console question
tacoma man.
10-19-2004, 05:49 PM
alright guys, i got me an overhead console, with the self dimming mirror at a junk yard for $45 back in the summer. i just put it in place and the only thing that works on it is the dome light. i do have the wiring harness to make it work but i just want to make sure that it will just plug into my harness in my 90 camaro and work. it came from a 88-90 iroc, the dome light should be one of those that stays on for a few seconds and then fades to off, now i know to take the dash pad out of my car and take the driver side pillar out, now if i plug the harness in for the over head console and hook it up right including the mirror, will it all work with my 90 models wiring. will the dome light dim out like it should after the door is closed
Dober89
10-19-2004, 08:26 PM
I think the standard overhead light uses the same gauge wiring as the console did. They stopped making those consoles in 87 too though and mine unplugs right above the mirror basically.
You got the pins to mount it too?? I think you should just have to tap the holes and thread them in.
You got the pins to mount it too?? I think you should just have to tap the holes and thread them in.
Chevyracincamaro
10-19-2004, 10:38 PM
you guys wouldnt happen to have, or know where i can get a picture of the overhead console you are talking about...
Dober89
10-20-2004, 03:25 PM
ill take one for you when i go out to the garage and find it
drvngstorm05
10-20-2004, 11:13 PM
here's one on ebay...
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&rd=1&item=7928749652&category=33695&sspagename=WDVW
there are others too, i wasn't lookin at price just for a pic
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&rd=1&item=7928749652&category=33695&sspagename=WDVW
there are others too, i wasn't lookin at price just for a pic
tacoma man.
10-21-2004, 03:01 PM
there was no drilling needed. all of the holes were there for the pins allready. it didnt take 5 minutes to install it.
Dober89
10-21-2004, 03:29 PM
you didnt have to tap the holes at all??
tacoma man.
10-21-2004, 03:39 PM
nope, its comes with some little I shaped locks that just slide into the slots that are already in the roof of your car, that is if you have a t top car. all t top cars from 85-92 has the slots and hols already cut out.
Chevyracincamaro
10-21-2004, 04:54 PM
that thing looks kindof cool, i was thinking if i could get it to fit into my fourth gen, but was wondering if it would first fit and second if it was worth the effort...
tacoma man.
10-21-2004, 05:08 PM
i dont think the forth gen would have a straight enough bar. would be cool though.
Chevyracincamaro
10-21-2004, 06:27 PM
thats what i was thinking. i dont know if it would fit right, and making it fit right i dont know if i would be happy enough with it to go through all that. ive been lookin at some pictures and i cant figure out what is on the front of the console, ahead of the map light?
tacoma man.
10-21-2004, 06:39 PM
it is a reminder spool, has several different things to remind you about, engine service, trips, mileage, the thing that sucks about it is you have to do it by hand.
Chevyracincamaro
10-21-2004, 06:51 PM
ok now i kindof want one, cause i can never remember what mileage to change my oil on...ever
Dober89
10-21-2004, 08:59 PM
Dont forget theres 2 different versions. One for ttops and one for hardtops. One of them, i think the hardtop has a big curve to it while the ttop one I think is fairly straight. One might fit a 4th gen but you would have to do some custom work to mount it. If you went through that much trouble I would suggest getting a nice digital one from another car.
Automotive Network, Inc., Copyright ©2025