What do you want for your car?

As some of you may know I'm in the process of starting a company (Deviant Motorsports) that makes fiberglass, carbon fiber, and kevlar parts, focusing on 4th gens and then expanding to other makes/models. What I need if feedback, the following is a list of products I plan on offering to start off with. I need to know what your opinions are on these products and what you would like to see in addition to these things. All of the following can be made in Fiberglass, aluminized fiberglass (commonly called silver carbon), kevlar, carbon/kevlar hybrid in black/red, black/blue, and black/yellow, and carbon fiber. Products

88-89 hatch - three lips and two side skirts designs
88-89 crx - three lips and two side skirt designs
88-89 4 door - three lips and two side skirt designs
90-91 hatch - three lips and two side skirt designs
90-91 crx - three lips and two side skirt designs
90 - 91 4 door - three lips and two side skirt designs

Console with cussioned arm rest and two cup holders that fits up flush with dash.

Lip for stock spoiler - Makes the stock hatch spoler have a slight turnup on the end.

Door sill covers

Gauge hood covers

Speaker Pods for door that fit into the space for factory grill

Speaker Pods for kick pannel

Head light eyelids - 4 differnt designs

Mirror covers - inside and outside rear view mirrors

Gas Door cover



Any suggestions or recomendations for additional products? I will also be doing custom designs for anyone who wants. Prices are not set yet but will be competative to other products on the market. I will also be able to ship world wide. Fiberglass items will come primered and ready to paint.

Here are some of the samples of the specialty composits such as carbon fiber, carbon kevlar, and aluminized fiberglass. These are in order from least expensive to most expensive with the exception of carbon/kevlar hybrids they are all the same price, no matter the color.

Aluminized Fiberglass is fiberglass with aluminum woven into it for a highly reflective silver surface.
http://www.fibreglast.com/images/contentimages/346.jpg

Kevlar is most commonly known for its use in bullet proof vests. It is a very and very abrasion resistant composite. Yellow in color.
http://www.fibreglast.com/images/contentimages/136.jpg

Cabon/Kevlar hybrids come in three differnt colors- black/red black/blue and black/yellow. It is carbon fiber and colored kevlar woven together. Very strong and light weight.
http://www.fibreglast.com/images/contentimages/295.jpg
http://www.fibreglast.com/images/contentimages/294.jpg
http://www.fibreglast.com/images/contentimages/293.jpg

Everyone knows carbon fiber, its the glory material for "the look" in automotive performace. Extremely strong and light weight.
http://www.fibreglast.com/images/contentimages/207.jpg


I will not be offering complete bumpers at the time, but plan to in the future depeding on how well this venture does.

Also if you are willing to offer parts I need to make molds from, you will recieve a discount on parts. IE If I needed a mold for a cluster hood from a 90/91 you could send me cluster hood, I would make a mold of it, and send it back to you unharmed in the exact conditon you sent it to me and I would return it with a money order reimbursing you for your shipping cost along with a cupon for a certain percentage off or even maby a free product.

Now its your turn, tell me what you want to see, stuff that I'v overlooked. I know alot of people are wanting carbon sunroof covers, and I will be working on getting those also. Hoods and fenders are not on the list because they are readily available on the market, I will however be working on hoods and fenders for 4 doors as I have had many requests because of lack of aftermarket support. If you would like a hood that could be arranged though. I am however thinking of offering carbon hood covers, it would be a one layer of cabon fiber that would be glued to your stock hood. It would offer nothing but looks, but thats all that some people want, and it would cost a fraction of a solid carbon hood. Anyway Let me know some feedback and tell me what you want to see.

-Daniel
Deviant Motorsports

You are on to something big there my friend. Glad to see that your starting a company for us poor 4th geners.

Here's a few ideaa and they would sell well:

-Center consoles for use hatchbacks and 4 door owners. I would like to see it similar to the rare center piece most of us can't get our grubby little hands on.

-How about some rear speaker pods for us hatchback owners (carbon fiber would be so nice) Go a little different than the actual rare ones.

- Maybe a rear lip for the bumpers. Shoot why not the whole ground effects kit package. Make one similar to the JDM one but will fit ours and we can find a way to mount it.

Good luck SilentChamber!

I will be making rear lips, you can buy the front lip, rear lip, and side skirts seperately or you can buy them all together and it will be a little cheeper. There is a lip styled after the J's style front lip that is more of a front spoiler type lip, A lip with a small turnout spoiler on the bottom, and a completely flat one. There are two side skirts one that is flat and one that has a slight turnout that matches the J's style one and the one with the small turnout.

I didnt think of rear speaker pods but I will see what I can come up with.

The consoles are going to be styled after the teg ones that people modify to fit, but I'll see what I can do about replicating the SiR consoles that your talking about.

Also if enough people show intrest I will offer midwings and complete replacement dashes.

The consoles are going to be styled after the teg ones that people modify to fit, but I'll see what I can do about replicating the SiR consoles that your talking about.

The good thing about the SIR console piece is that it would be easier to make since the whole integ look-alike console will be longer and bigger to produce. You could sell the SIR console cheaper too since they are kinda small.

And do incorporate cup holders into both. I would only buy them if they had that. Everyone can symposhize with me too!

id like to see what the lip for the rear spoiler would look like..

id be interested in a lot of these things, id definitely buy a few if u were to make them

theres one piece i was planning on buying from someone else that made their own carbon fiber products, but i was never able to get it - a carbon fiber fuel pump cover to replace the metal one..it would look good for people with stripped interiors like myself..would u make one-off parts like this?

Yes I could do that, You can also design your own lip and such and I will make it. I will have pictures up of all the stuff when I lauch the site, as well a pictures to prove the quality of the products.

door sills. the part at the bottom of the door opening that the carpet is stapled to when stock.

door pillars. on the outside of the car, between the two side windows. the piece on the door, and the piece thats on the frame and covers the rear side glass hinges.

gas door

SiR spoiler WITH LED

side mirrors. with the control stick to adjust them, and the plastic bezel that goes around the control stick.

door handles. i know this is extremely difficult. but even if all you made was the outer part, and left the actual handle stock, it would be awesome.

any interior pieces. i hate the texture in the 4g interior with a passion. any pieces in there would rock in CF. headliner, all the pillars, the door panels, the rear quarter panels. damn, now that im imagining it, i want the entire interior to be CF

awesome man, ur well on ur way with this stuff, hurry and post pics so i can get better ideas on moulds too cuz i think the ones i'm doing are gonna look like ass when there done


also, the aluminized fiberglass... how do u make that???

I have door sill covers on the list, these will fit on top of your stock ones and attach with glue, that way you dont have to go though the trouble of removeing all the staples and restapling it to the new one and all that.

Same thing with gas door.

SiR spoiler... I'm going to attempt that with my own car, making a mold of something like that would be very complex, but I'm definatly going to be attampting it.

Side mirror- The parts that make the mirror move and attach to the controle stick on the inside is all very complicated and I dont think I'v be able to replicate it. But I will offer carbon fiber (or any other material you want) covers for the mirrors. I will add inside mirror bezel to the list though, thanks for that idea. I'v also added door handle covers to the list. I could make interior peices but due to the way they mount and such most of the pieces would just be covers that would slip over your factory interior pieces. The door pillar outside trim has been addeed to the list.

What about pillar guage pods that are made specificly for 4th gens? Or panels that would fit into your glove box to mount gauges in?

the aluminized fiberglass is done in the same mannor as regular fiberglass and has the aluminum woven into it from the supplier. Its really nice stuff and the price is not much more than regular fiberglass.

CF moldings around the whole car on the trim would be sweet as hell!

the aluminized fiberglass is done in the same mannor as regular fiberglass and has the aluminum woven into it from the supplier. Its really nice stuff and the price is not much more than regular fiberglass.


awesome, i'll have to look into that. i thought maybe it was just aluminium shavings in the resin or something

nice, I had also thought about offering a differnt trim that would fit more flush and not stick out like the stock trim, but would install the same and you wouldnt have to modify your car. Exterior trim added to the list.

how much would u want for a carbon fiber dash for a 4 door? Im just curious.

complete stand alone dash? $500, however I could make covers that would fit on top of your existing dash for considerably less around $175.

A JDM CF front lip would be nice :)

Unless I missed it, replacment stock doors, fenders, hatches, hoods, inner door pannels and pretty much anything else that can be replaced. The alumiinized as a hood would be sweet.

I want my car to be rust free. Can you help with this? :) j/k

Good luck with the business. I'm interested in the center console with cup holders. Any estimate on a price? Thanks.

What about pillar guage pods that are made specificly for 4th gens? ?


Now THAT would be hot, id def get one of those!!!

center console with cup holders, i need that too

def a front lip

silent chamber still post whoring around....j/k looks like you getting somewhere in life on here now good luck

I'll update the list tonight, keep throwing out suggestions though, yall are comming up with stuff I never thought of. And hopefully the supplier will get back to me before I leave the shop so I can post some prices.

I'll update the list tonight, keep throwing out suggestions though, yall are comming up with stuff I never thought of. And hopefully the supplier will get back to me before I leave the shop so I can post some prices.

-how about a duckbill style spoiler for the 4th gens....those spoilers look hott and im tempted to get a 5th gen just so i can get one.

-side moldings like you said before. in C/F

-rear view mirrors inside the car.

-...shot in the dark....but you know those gauge clusters that they make for integras and such that fit insode the gauge bezel...i like those a lot..not sure if you can make on work with the gauge layout tho.

-fuse panel cover.

-i like the fuel pump cover idea.

-tail light center piece.

-eyelids

thats about all i got for now

BTW you need to get a web site up and going when you get a couple products ready

How about a guage pod for the a pillar for the 87? I know this is a stretch... ;)

the spoiler extention I"m going to offer makes the stock wing look like a duck bill style, There is not enough room inside the gauge cluster to add anything else, although I could make one that fits fits over the gauge cluster hood that could house a guage on each side.

I'm looking for a low cost web designer, or I'm going to have to do it all myself. Going to be under DeviantMotorsports.com though. If anyone does webdesign PM me or something, I could give you a discount on something.

Figori- I could do it but I would need to borrow your pillar for a few days.

Sounds good, how much experience do you have with CF?

:( nothing for crx's :(

shaddr3, I'v been working with composites for about four years

bigwally9876, how do you figure that? alot of that stuff fits both civic and crx, as well as there is a whole line of lips and side skirts for the crx.

I think everyone has covered almost everything. How about the plastic covers that go on top of the front and back struts? And covers that could go on the handle to pop out the back windows of the hatch or covers for the door handles...

would you be willing to sell something like a 1' x 1' sheet of any of those materials for me to cut out and use myself..?
im wanting to cut out a piece to put in place of where the stereo mounts, then cut out holes for gauges

Yeah I could sell you a flat square of any of them.

Ok I got some prices going on-

Fiberglass:
Front or rear lips, any style- $50
both side skirts, any style- $120

Aluminized fiberglass
Front or rear lips, any style- $90
Both side skirts, any style- $180

Kevlar
Front or rear lips, any style- $90
Both side skirts, any style- $180

Carbon Kevlar hybrid, any color
Front or rear lips, any style- $110
Both side skirts, any style- $200

Carbon Fiber
Front or rear lips, any style- $150
Both side skirts, any style- $250

Dont have the pirces figured up on the other things yet, have to figure out how much material they will use and such. But those prices should give you any idea of how the pricing should go.

I got something that nobody mentiond that is pretty easy to do and would sell very well.

a CF and Fiberglass Replacment Moonroof Panel for the 88-91 CRX. they rust like a Mofo and a CF/FG unit would not.

also us CRX guys would like a Cupholder/armrest possibly with storage in it for CD's or something ? ... I like my integra console but it does not fit quite right.

fuck yeah i need a damn cup holder!!!! please those damn vent ones always brake on me! cant wait to see some pics on the items already in the works

Kunundrum- I'm trying to find a sunroof/moon roof panel to make a mold of, alot of people have shown intrest in carbon ones like you said.

Would a console that is made for a civic fit a crx? I dont know if the floorboards are drasticly differnt or not.


To who ever wanted a carbon fuel pump cover I just got though making a mold and its ready to go, tomorow I'm going to make a mold of the one that covers the fuel filler tubes to go along with it, probably sell them as a set.

Kunundrum- I'm trying to find a sunroof/moon roof panel to make a mold of, alot of people have shown intrest in carbon ones like you said.

Would a console that is made for a civic fit a crx? I dont know if the floorboards are drasticly differnt or not.


To who ever wanted a carbon fuel pump cover I just got though making a mold and its ready to go, tomorow I'm going to make a mold of the one that covers the fuel filler tubes to go along with it, probably sell them as a set.

HOW MUCH?!?! if my car isnt totaled ill be buying one.

Ooh..this is all very exciting! Console with cupholders and room for cd's for 88 civic hatch, that would be awesome. As well as anything for interior or cluster. Fenders definitely, and I really would like a cf/kv cd dash mount. (not sure what its called..durr..)

I'm looking for a low cost web designer, or I'm going to have to do it all myself. Going to be under DeviantMotorsports.com though. If anyone does webdesign PM me or something, I could give you a discount on something.




Check out "NJIMAGE.com"

If you like the work you see, let me know, I can hook you up with the web guy...he's my landlord

He can build just about any kind of site you want, just give me a price range your lookin for.

forcefanajd- I should have some more prices up soon.

DJHyper- I'm fixing to look at that site, thanks for the suggestion.


I think we've covered just about anything that can be made, unless we've all overlooked something.

To who ever wanted a carbon fuel pump cover I just got though making a mold and its ready to go, tomorow I'm going to make a mold of the one that covers the fuel filler tubes to go along with it, probably sell them as a set.

bet. i'll definitely be getting both of those pieces

PLEASE the combat or kombat front bumper!!!

PLEASE the combat or kombat front bumper!!!

no. Thats why I'm doing this, to get away from all the over styled body kits that look bad on our cars. Plus All my designs are original, not copys of someone elses.

This is kinda of far fetch but how bout a AF cargo cover? Except it wouldn't move unless your willing to put hinges on it.

What about shift knobs? Or would that be too hard to get them strong enough to work without breaking? Just an idea.

shift knobs would be hard because it would have to have a metal insert down the middle that would have to be taped to make it screw onto the shifter, and theres not much I could do with a shift knob that hasnt been done allready.

shaguar, not sure what your talking about, mine didnt come with one.

I think a custom dash and the center console would own. especially with cup holders....

Also, what about some fenders, or fender flares?

man, that fuel filler tube cover is a bitch to get off. I think if I make one I'll design it differnt so that its easyer to put on and take off.

shaguar, not sure what your talking about, mine didnt come with one.

Ya know, a cargo cover in the back on hatchs and crxs. Either CF or Aluminum Fiberglass would really look sharp.

fenders and fender flares are both doable, I'm wanting to make a widebody kit that accually looks good, the other one on the market doesnt really appeal to me (or many other people I dont think).

I have a few questions though.
1. would a console made to fit a 88 hatch also fit a crx and 4 door? Are there floorboards and seat spacings differnt enough that it would cause it not to fit?

2. Would any of yall be willing to help me out on the bumper lips? I will send you the stuff to trace the bottom outline of your STOCK bumper along with return postage, and will give you a $20 discount on anything purchased when I open the shop? It would require you to take your bumper off and sit it on the ground, or use a jack and hold a piece of wood or something under it so you have a surace to trace it on, but your efforts would be repaid with the discount. If your intested let me know, I need the following:

90-91 hatch
88-89 crx
90-91 crx
88-89 4 door
90-91 4 door

1. would a console made to fit a 88 hatch also fit a crx and 4 door? Are there floorboards and seat spacings differnt enough that it would cause it not to fit?



After just getting my crx dash, the crx console (plastic part) will bolt up to the two top holes on my hatchback dash so they are interchangable. So anything from a hatchback will bolt in the crx as well, since all the screw holes are in the same postion. It's just the metal bracket behind it that makes all the difference Same goes for a 4-door console cause I had one in my car for a long time too.

And yes the console around the ebrake are all the same as screw positions are concerned for all.

Crx seats are a little tighter together since they are a little wider. 4-door and hatch seats are practically the same thing.

HOpe that helps.

Thanks that helps alot, I didnt want to have to make three differnt consoles. I'm probably going to have the the lips/side skirts for 88/89 hatch ready in about a week or less, as well as fuel pump cover, hopefully the console, and a few of the small pieces. So those will hopefully be up for sale in about two weeks. The rest will be a little longer, making molds takes time. Also need some poeple to help me out with the lip shapes as mentioned above. So If you have any of those give me a PM and we'll work something out.

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNjExNDM3NnM0MTNkZmQzMXk1NDE%3D.jpg
for civic's and crx's

{iwi']http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNjExNDM3NnM0MTNkZmQzMXk1NDE%3D.jpg
for civic's and crx's

hott...thats makes me wish i had a sunroof

I'm always dreaming of just having one. Someday, it'll come.

If I can find a sunroof for cheep or convence someone to send me theres I'll make those.

i would donate my civic one but its to cold to drive around with no moonroof

How about some carbon floormats? anyone be intested in those?

Also on some of the larger stuff I may setup where you can do a group buy and save money, becasue If I buy in bulk I save so If you buy in bulk you should be able to save also.

Hey, I might be able to help you out on a custom dash. How do you make your molds? I've worked with fiberglass forever, I love it. Im willing to help ya out, idea sounds good, especially for 4drs!