95 gsr Swap to a 94 civic Lx.

hey peeps im just looking into getting some info on a swap. i just got me a 95 gsr motor tran and ecu and i will like to know if it will fit on a 94 civic lx.is the swap good to do it. it is recomend it.pls any help any tips will help. thanks

No, that motor is way too big to fit in that tiny car. It's an Integra motor in a Civic, just not possible.

Now that I got that out of the way... You'll need the mounts, rear bracket, axles, and shiftlinkage. You'll also need to do some wiring: http://www.ff-squad.com/tech/wiring/wiring.92-95.jpg I'd advise getting a manual if you don't know where these wires are coming from. And also having someone who is familiar with the swap (or B-series Civic swaps) to help you.

No, that motor is way too big to fit in that tiny car. It's an Integra motor in a Civic, just not possible.

WTF are you talkin' about? It totally is possible, he'll just need mounts axles and a harness! Quit misinforming people!

And Civic/Integras are pretty much the same chassis just different body panels!!!!!

Clearly I was just messing with him. Did you just read those 2 sentences or did you read my whole post? Why would I tell him all the parts he needs and give him a link to the wiring if I was serious? It's better than me doing the other option of writing "fucking search newbie." Would that have been better? And no the chassis are not the same, the engine bay may be the same or almost the same but the rest of the physical chassis isn't; width, length, height...quit misinforming people :rolleyes: Had he actually looked around, I don't know say the top of this forum and looked at the " The COMPLETE 92-00 Civic Owners Engine Swapping Guide!! (http://www.automotiveforums.com/vbulletin/showthread.php?t=19176)" then he wouldn't have even had to ask. Don't be such a whiny bitch.

They are pretty much the same b/c for one 90% of the suspension stuff is interchangable between the two.

BTW I did read your whole post.

lol you guys had me goin there for a min.. well my cusin had the b18 and he crash the car on the right hand side doors. he ate a light and he got f*cked.lol so now the motor and tran with comp. its mine w/ wires and all that good stuff now im trying to get the back brakes to do the change also any advises on the suspension. or what else i will need for the project to be completed..hit me up. thanks again

hey guys i did the swap and now all i need is the setup for the wiring of the vtec car moves great it sink the front nose of my car that shit is in the floor but it looks good right now all i need its a good diagram for the vtec there was one from the top of the forum that i try to use but for some reason it didnt work and now i think i need the ecu reseted. and help will be great thanks..holla at ur boy pls.

wow, that was a little late so forget I posted anything. lol

http://tech.hybridgarage.com/tech/5gtech/index.html#B18EG6

give that a shot. thats what i used

Did you make sure that you connected the right wires on the engine harness side with the harness to the ECU side? Did you make sure to wire up the red and yellow points on that ECU pinout at the top?

WTF are you talkin' about? It totally is possible, he'll just need mounts axles and a harness! Quit misinforming people!

And Civic/Integras are pretty much the same chassis just different body panels!!!!!

LMFAO:lol::grinno: