2 questions
korndogg
10-14-2004, 04:22 PM
ok first
the light on the drivers side door is out. is there an easy way to replace it or do i have to take the panel off to get to it?
2nd
my rear side window on the third door is loose by the lock. the window actually vibrates when im driving. can this be tightened or should i go to the dealer?
the light on the drivers side door is out. is there an easy way to replace it or do i have to take the panel off to get to it?
2nd
my rear side window on the third door is loose by the lock. the window actually vibrates when im driving. can this be tightened or should i go to the dealer?
chuck16
10-14-2004, 10:20 PM
Not too sure about the window but, funny enough my door light was out when I bought my Silverado. You have to remove the door panel to change the light. Kind of a drag but, it only takes about 7 minutes to pull the panel off. Let me know if you want to know how to do that.
A thought about your window see if you can change the pins that pivot the window in and out maybe you can put something in a little thicker in diameter?
A thought about your window see if you can change the pins that pivot the window in and out maybe you can put something in a little thicker in diameter?
ptown201
10-14-2004, 11:42 PM
About your window. Go to the dealer if its still under warranty. I had the same problem about two weeks after i bought my truck, but my window fell out. It doesn't take them too long to fix it if they have the parts.
skipr
10-15-2004, 12:08 AM
when I pulled off my door panel, some of those cheap plastic one way pins broke, I used a good quality puller (looks like a big shoe horn) Is there something I did wrong? And I know what your thinking " yea you did something wrong , YOU did the work!
korndogg
10-15-2004, 01:00 AM
can i just take like the bottom part of the panel off to get to it or do i have to take the whole thing off?
vnotaro
10-15-2004, 09:59 AM
can i just take like the bottom part of the panel off to get to it or do i have to take the whole thing off?
If it's the new body style, you have to take the whole panel off because it lifts up and away from the door from the bottom. Don't worry, it's still faster and easier than the old doors with those crappy plastic push pins that always bent or broke.
If it's the new body style, you have to take the whole panel off because it lifts up and away from the door from the bottom. Don't worry, it's still faster and easier than the old doors with those crappy plastic push pins that always bent or broke.
jeverett
10-15-2004, 10:09 AM
can i just take like the bottom part of the panel off to get to it or do i have to take the whole thing off?
You need to remove the whole panel to do it. All you do is remove 3 screws and lift the panel up and away from the door.
You need to remove the whole panel to do it. All you do is remove 3 screws and lift the panel up and away from the door.
Automotive Network, Inc., Copyright ©2026