need some specs please

A graciuous good day to you all,

I would greatly appreciate it if you folks might be able to help me with collecting some data for an 00 V6 Sport.

I am searching for the following to help build a profile for the Speed Tracer tool from AutoEgninuity:
Weight ( I think wet weight is what they would be looking for )
Gear ratio
Drag Coefficient
Friontal Area (in sq ft)
Tire circumference for 17 in tire
Gar Ratio Variable
-Working Gear x.xxx:1
-REar End Ratio x.xxx:1

This tool came free with their scan tool whic I recently purchased and am would like to see this thing in action. Although I am a staunch DIYer I seldomly delve in to the realm of this tye of information and would even know where to begin. But I will look in my owners manual tomorrow becasue I do RTFM.

TIA

'00 LS6 Getrag data:

Engine - 3.0L (2967cc) Aluminum DOHC, 4V
BorexStroke - 89.0x79.5
Compression - 10.5
Gear ratios, 1st through 5th, reverse- 4.23/2.52/1.66/1.22/1.00/4.14
Rear axle ratio - Varies by date (3.58, 3.31, or 3.07) Check tag on pumpkin.

Curb weight - 3572 lbs
Length x Width x Height (in) - 193.9x73.2x56.1



That's all I've got, Noah. You should be able to find tire dia on the tech sheet at the website for your tires. Frontal area might have to be a physical measurement unless heightxwidth will work. Drag Coef. might be out there in a test somewhere... I didn't dig real deep since I knew where this data was. Don't know what gear ratio variable is...