What does your 4g Idle at?
quiXilver
10-10-2004, 07:49 PM
I was just wondering what everyone's car idles at? Or what it's supposed to idle at.
]{iwi
10-10-2004, 07:52 PM
around 750 rpms
TheSilentChamber
10-10-2004, 07:59 PM
around 750 here also, little higher right after I start it up then it idles down.
Hey kiwi, your not a newbie anymore lol.
Hey kiwi, your not a newbie anymore lol.
]{iwi
10-10-2004, 11:18 PM
woot for me do i get a cookie or something i could sure use a cookie right now i got the munches like u would not believe
LSfrankenstein
10-10-2004, 11:45 PM
i advanced my timing about 20 degrees so the combustion is faster and my idle is higher
91civicDXdude
10-10-2004, 11:57 PM
Kiwi loves teh cock
Hybrid1990crx
10-11-2004, 12:11 AM
mine is around 600-700.
4G4D Store
10-11-2004, 12:14 AM
Mine idles anywhere from 400-600 usually.
0SER
10-11-2004, 12:16 AM
Crap, mine idles at 1,000 unless I have my lights on, then it's like 900, is there something wrong? If so, could you tell me what you think it is.
TheSilentChamber
10-11-2004, 12:57 AM
theres an idle adjustment screw somewhere, cant tell you where because I dont know.
quiXilver
10-11-2004, 08:03 AM
Crap, mine idles at 1,000 unless I have my lights on, then it's like 900, is there something wrong? If so, could you tell me what you think it is.
There is a flat head screw on the pass. side of the intake manifold kinda around the back side, it's the only one like it, you can't miss it. See if you can turn that one way or the other to get it where you want it to be.
There is a flat head screw on the pass. side of the intake manifold kinda around the back side, it's the only one like it, you can't miss it. See if you can turn that one way or the other to get it where you want it to be.
quiXilver
10-11-2004, 08:03 AM
Mine idles anywhere from 400-600 usually.
hey haven't seen you around lately
hey haven't seen you around lately
0SER
10-11-2004, 09:41 AM
Thanks a lot for the info quiXilver.
RedRacerCivic
10-11-2004, 02:29 PM
mine has to idle at 1000rpm cause i have a cam.
Santas90Si
10-11-2004, 03:41 PM
old CRX idle at about 1100 cause of cam and intake mani not being torqued down all the way.
quiXilver
10-12-2004, 07:03 PM
There is a flat head screw on the pass. side of the intake manifold kinda around the back side, it's the only one like it, you can't miss it. See if you can turn that one way or the other to get it where you want it to be.
I am wrong this is not the idle screw don't mess with it!!! The idle adjuster screw is under the throttle!!!
I am wrong this is not the idle screw don't mess with it!!! The idle adjuster screw is under the throttle!!!
Automotive Network, Inc., Copyright ©2026
