help me

i recently had a code pulled on my car and it came out a (32) bad erg valve. my dad replaced the valve and now it is worse than before! i we nt back and had the code pulled again it came out a (32) and also a (33)mapping something....??? the car is having trouble starting up and shaking when its stopped. what do i do to fix this?

i recently had a code pulled on my car and it came out a (32) bad erg valve. my dad replaced the valve and now it is worse than before! i we nt back and had the code pulled again it came out a (32) and also a (33)mapping something....??? the car is having trouble starting up and shaking when its stopped. what do i do to fix this?

Were the codes cleared after the install? Swing over to a AutoZOne if you have them in your area and they'll usually clear codes for free:-)

Gotta love the AutoZone!

--Jay

Sometimes the codes have multiple possiblities as to what the problem may be and the manual will only tell you one. You can find what else the codes could be online, a quick search should bring up a few resources. (I know from experience)

http://www.troublecodes.net (http://www.troublecodes.net/)
Get a mitchel manual and it will tell you how to read/fix the codes.

Thats probably the MAP sensor. MAP stands for something but not mapping, lol...in my experience you have to clear the codes after you replace the egr..and usually need a map sensor when you need an egr...

Manfold Absolute Pressure = MAP - Could be as simple as a dissconnected or broke vacuum hose going to it...