problem with panasonic deck...

i just installed a new panasonic deck in my car and there is no sound goin to the subs. there is power running to the amp. i checked everything. my rca cables and speaker wire is all fine. ive played around with the decks settings and still have had no luck. right before i put this deck in i had a kenwood installed and the subs worked great and i never touched them. does anyone know what the problem is???

My best guess would be the remote wire

Does the amp turn on when the deck is on? If not, remote wire. if you cant tell, or dont have a power light, take a wire, and jump between power wire + on the amp, and the remote wire. This will turn the amp on. I would pull the deck out, and make sure the rca's are connected to the right spot, the output, not input.

yeah just like the other guys im thinking the remote wire

are the rcas hooked to a sub preout? if they are try switching them to the rear preout, i bought a panasonic deck a couple years ago and the subpre outs didnt work, had to send it in to get repaired 8 weeks later get it back and its still broken, got a new pioneer instead. Will never buy panasonic again. just an idea