Parking lamp - P10

How you you get to the bulb next to the headlight but in the same unit??? Mine burnt out but I can't figure it out how to replace it.

It will be a lot easier if you remove the headlights :D. Seriously, that's what I did a couple of years ago after I cut most of my fingers trying to change that bulb!

I can get my fingers down there no problem. Now what? Twist, pull, push???

Oh nevermind, I got it out.

Future Reference: twist it anticlockwise for removal

How did oyu get fingers down there ? Elastic fingers ?

Hey Colin, is this what the bulb you took out of there looked like?
http://files.automotiveforums.com/uploads/888795wedge.jpg
Its a Philips W5W wedge-style bulb.

Originally posted by poppy_morenito
How did you get fingers down there ? Elastic fingers ?
Let you hand go limp and cram it down there at a funny angle. It was hard but I did it. I don't think I could get the passenger side though since there is that wierd thing with all the tubs comming out of it. Fortunatly only the driver side burnt out.

Originally posted by kheetar
Hey Colin, is this what the bulb you took out of there looked like?
http://files.automotiveforums.com/uploads/888795wedge.jpg
Its a Philips W5W wedge-style bulb.
Yep.

You guys think these lights suck to change... try changing out the bulbs on a 300zx twin turbo. There is absolutely NO room whatsoever. I thought these little bulbs sucked to change. They are pretty easy in comparison :(

Originally posted by TRBOBRK
Oh nevermind, I got it out.

Future Reference: twist it anticlockwise for removal

Colin, thats counterclockwise...

Man so your sopost to twist....cuz I tried to twist....but it didnt comeout...so, I took out the harness......then when I tried to put it in.....it didnt conect to the bulb.....so now I have no clearance lights....!:alien: :bloated: :licker: :smoka: :flash:

Originally posted by TIZAO
Man so your sopost to twist....cuz I tried to twist....but it didnt comeout...so, I took out the harness......then when I tried to put it in.....it didnt conect to the bulb.....so now I have no clearance lights....!:alien: :bloated: :licker: :smoka: :flash:

twist your hand... not your hips...

i bet you got a ton of funky stares from your neighbors by dancing in front of your car with your hand in the engine bay.

what i did with my clearance bulbs: snipped the wire- routed them down to under the bumper and installed some fog lights. they went on first- then the headlights would come on when turning on the lights to the car. not bad. they're gone now though. can't run foglights AND a loud stereo...

-clifford

HEY YEA!!!! Good news everyone! I got them out!!!! MAn it sure was easy....what are all you guys talkin about? And I am a big man with big hands....(yes ladies...hehe) The driver side was really easy just had to think about if for a second.....and the pass....I had to unhook something blocking the way and then I had access...then snap put it back in......I wonder why everyone says its soo hard?.....Was I just lucky>? :alien: :bloated: :licker: :smoka: :flash: