Auto Manual questions

I am doing an Auto to manual swap at the same time I'm dropping in my SR20. I was wondering which lines can I use off of the clip and which ones will I have to get from a 240. If I'm not missing anythings lines should be the only things to not transfer correct me if I am wrong thanks.

You need the clutch lines, the clutch, the harness for the manual tranny which i believe you can use the sr wiring. also you would have to change out the brake pedal and cut a hole in the firewall for the clutch pedal. Check out www.heavythrottle.com and go to sr swap on the left side, it goes over a little about the auto to manual swap cause they had to do that when they were installing the sr.