Supreme HP engine swap, Need experienced feedback
Darrdevil_speed
10-03-2004, 11:35 PM
I have a 1987 b2000 , i plan to remove the engine and possibly the tranny and purchase a 1992 mazda 13bTT "Twin Turbo" Rotary engine by JDM.
im just wondering if i could use the existing tranny, or maybe a rx7 tranny would bolt on the truck?
heres a b2000 with a 13b
http://www.geocities.com/cd23c/cars.html#b2000
im just wondering if i could use the existing tranny, or maybe a rx7 tranny would bolt on the truck?
heres a b2000 with a 13b
http://www.geocities.com/cd23c/cars.html#b2000
that guy.
12-06-2004, 02:10 PM
it can be done. most likely the 13b will not bolt up to the stock tranny.
and the 13b tranny might not bolt right up to the stock mounts or drive shaft. what will need to happen when you get the motor and tranny is, you will need custom mounts, custom wiring, unless you know about that one, and also a custom driveshaft will have to be made. as for the drive shaft, that should be done last so they will know how long to make it. lmk if you need more details.
and the 13b tranny might not bolt right up to the stock mounts or drive shaft. what will need to happen when you get the motor and tranny is, you will need custom mounts, custom wiring, unless you know about that one, and also a custom driveshaft will have to be made. as for the drive shaft, that should be done last so they will know how long to make it. lmk if you need more details.
Automotive Network, Inc., Copyright ©2026