Crapola!!!!

Hey. ok as the subject states i bet you can figure i got a problem. Ok i just install the 55occ injectors, 190 pump and the S-afcII. well here's my problem. after install it all i started the car, cranked right up and idled a little high but i figured it was just the ecu relearning and alkl the extra fuel, well i start hearing a little"HISS" sound and i look and notice the BOV recirculating hose that runs to the intake was unplugged. I hooked it up and the car killed, wouldnt idle, everytime i start it it would crank right up but then kill, unless i give it some gas. Sounded like shit. I did the base fuel line corrections to the s-afcII( -10%) and still didnt idle.Well i hooked up the pocketlogger and i got a error code of P0100(air flow volume) well after a little cussing and kicking shit(not the car) i remembered that we had to take the gas cap off to vent the tank. put the cap on thinking YES! this will work now. WROOOONG! its idling now but BARLEY.(sounds like i have a hugh ass cam.) I also noticed that the aftermarket boost gauge works and read the vacuum and boost but the stock boost gauge just sits there all the way down. HELP!

ok i think i found something, anyone know a good afc tuner step by step instructions for this thing, i got it running and ideling fine. I had to change it to 4cyl( DOOH!!)

nvmd i found the link for RKO tunng, i'll let yall know whats going on.

good... my low throttle base maps are all around -20...

And the default flux capacitor overflow setting is on beta-hybrid mode @ 12 psi, just don't blow the welds on the intake manifold ;).

ok i just finish tunning the low thr points. i made a 3rd gear pull from 3k to redline and no fuel cut YIPPYYYY!!. i logged it so im going to send it to spyderurbo007 so he can check it out for me. I'll post pics soon of the final install, im hungry tired and dirty. im going take a bath then eat then i'll post those pics.

nice! now you really need to get an EGT so you don't melt your head :)

http://memimage.cardomain.net/member_images/1/web/553000-553999/553181_18_full.jpg

http://memimage.cardomain.net/member_images/1/web/553000-553999/553181_19_full.jpg


just to pics of the final install.

Very nice looking :D. I almost got that shift knob at autozone before I ordered one from speed-source.net!

this is just for the time being. im going to move the safc under the radio, i'm going to have to cut the black trim piece to make it fit. Im thinking about making a billit alum. piece to fit just like the trip piece and mount the radio and a/c controls and the afc. just a thought. im going to try and get the palm pilot hot sync cable to mount in my car, i have the cradle hotsyne cable now.Oh and thats not the knob from autozone, i got it from Procarparts.com. I want a new one, got a pic of what yours looks like.

ive also seen the afc in front of the a/c vents but F that it hot down here in Louisiana and i need all the air flow i can while im not racing( a/c sucks the power out these 4banger baaaad)